Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Please Donate to the Prowler Owners Association | To post on these forums, you must register a username. It's completely free and takes only 30 seconds. Register Now! |
Bottom of Page This topic is 18 pages long: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 |
next newest topic | next oldest topic |
Author | Topic: Florida |
cdeluca99 POA Site Supporter Prowler Junkie From:Patchogue, NY, USA |
posted 04-21-2023 04:17 AM
I’m very fortunate and have access to a Lear 60 jet every now and then. You would think taking a private plane would be absolutely amazing right. Got the cats loaded up at 7 am for an 8 am take off. I’m not an airplane mechanic so may not be saying this correctly. The computer needed a quick update download. No big deal. They plugged the laptop in and for some strange reason ran the power out of the plane to another source. 75% of the download was complete and someone tripped on the power cable and BLANK we lost the download and now there’s an error code and warning lights when they try to get her going. So they try to fix it but no luck.Now it’s NOON the cats have been in the carriers for 5 hours and I am still in NY. Long story short they put us on another jet and we were here by 4 pm. The cats were beyond amazing. They’re all very happy now.
quote: This message has been edited by cdeluca99 on 04-24-2023 at 06:04 AM |
cdeluca99 POA Site Supporter Prowler Junkie From:Patchogue, NY, USA |
posted 05-04-2023 04:10 AM
Finally in my new garage!!! I had an issue yesterday tho. Fuel gauge read 1/4 stop for fuel only takes 2 gallons won’t take any more. Now my gauge says 1/2-3/4 anyone know what’s going on? Thanks |
Landscape Doctor POA Site Supporter Prowler Junkie From:Pelham, NH, United States |
posted 05-04-2023 06:04 AM
Mine is fluky too,,, when mine gets down to just about 1/4,,,, tank is empty. When it reads 1/2,,, it's about 1/4 full. I just made a mental note to self!!!!
quote: This message has been edited by Landscape Doctor on 05-04-2023 at 06:06 AM |
cdeluca99 POA Site Supporter Prowler Junkie From:Patchogue, NY, USA |
posted 05-04-2023 06:15 AM
I’m not sure what’s what yet. Showed 1/4 tank when I tried to fuel it up it overflowed!!! Now showing 1/2-3/4. I have a Tom Mills fuel pump. Maybe there’s something with the sending unit? I have to fix it, I just can’t leave it I’ll lose my mind lol |
garysss POA Site Supporter Prowler Junkie From:Baltimore, MD, United States |
posted 05-04-2023 07:30 AM
Could it have something to do with the new fuel cap? Is this the first time you got gas since Prowler was finished? |
cdeluca99 POA Site Supporter Prowler Junkie From:Patchogue, NY, USA |
posted 05-04-2023 07:47 AM
No. The 1st time she was on fumes at the body shop and she took 9 gallons no problem. I drove it on a trailer and maybe 6 miles. I noticed the gauge on 1/4 tank yesterday and stopped for fuel to be safe. I hooked up the vent and actually used the factory fill hose and vent pipe. I’m going to yank the fuel pump this weekend and check the float. |
cdeluca99 POA Site Supporter Prowler Junkie From:Patchogue, NY, USA |
posted 05-04-2023 10:05 AM
Gas cap wasn’t sealed. Disconnected the negative, adjusted the cap and we’re golden!! Still have to check that fuel gauge issue tho. Thanks Gary. This message has been edited by cdeluca99 on 05-04-2023 at 10:06 AM |
cdeluca99 POA Site Supporter Prowler Junkie From:Patchogue, NY, USA |
posted 05-07-2023 06:51 AM
First show today 9-12. She’s never been in any shows before. Excited to see what people think of her. |
cdeluca99 POA Site Supporter Prowler Junkie From:Patchogue, NY, USA |
posted 05-20-2023 08:03 AM
Replace or clean up the negative ground for the battery. I replaced my crappy old cracked up one with 2’ of 2ga wire I got from Amazon for 13 bucks. It’s totally worth a shot. Factory wire is 4ga you can use that too. I’m running a yellow top optima so I figured I’d go a little heavier.
quote: |
cdeluca99 POA Site Supporter Prowler Junkie From:Patchogue, NY, USA |
posted 06-14-2023 08:01 AM
Gave her a quick wipe down this morning. Clubhouse grand opening this morning. I’m going to take her up there. |
cdeluca99 POA Site Supporter Prowler Junkie From:Patchogue, NY, USA |
posted 06-15-2023 05:11 AM
Had a blast yesterday. The car drew quite a crowd. I need to take a pic when she's out parked with other cars, looks really small and pretty cool. Actually thinking about selling her. I have my eye on a 66 Chevelle for sale locally here. What do you guy's think? Keep her or sell her? |
Landscape Doctor POA Site Supporter Prowler Junkie From:Pelham, NH, United States |
posted 06-15-2023 06:53 AM
Love that year. Hard choice. |
Stray Cat POA Site Supporter Prowler Junkie From:Dayton, Ohio, USA |
posted 06-15-2023 07:06 AM
After all that work???? I haver my thoughts, but that's for another post. I have a 1966 GTO. Long story. Painted Pontiac Copper Blaze Poly. Unique and very cool car. Pontiac Historical Services said the car doesn't exist. Never produced that color. Produced in KS, should be Tiger Gold. I produced proof, its orange! They had never seen one. Came back two weeks later, "well, you are correct. Copper Blaze Poly was actually a 1966 Chevelle Color. Aztec Bronze. Only a handful of them produced. Never seen one. I'll do another, longer post on this topic as it is gut wrenching for me, here in Dayton Ohio. Don't sell it. JMHO. Have someone else drive it and watch it go down the road. I've followed Steves high boy. They just look awesome going down the road. Especially in the rain! Talk about rooster tails! haha. John This message has been edited by Stray Cat on 06-15-2023 at 07:09 AM |
Stray Cat POA Site Supporter Prowler Junkie From:Dayton, Ohio, USA |
posted 06-15-2023 07:11 AM
There is still a lot of junk in my garage but I am slowly moving all that stuff into a 12 X 18 storage shed which I insulated and put a mini split in. Want the garage to just house my vehicles. Have another lift being delivered hopefully Monday. John This message has been edited by Stray Cat on 06-15-2023 at 07:14 AM |
cdeluca99 POA Site Supporter Prowler Junkie From:Patchogue, NY, USA |
posted 06-15-2023 10:30 AM
Yeah, I’ve changed my mind. I’m going to keep it. I might put a more street able tire and wheel combo. The problem is the 20” rim in the back. I need a huge tire but a 325 series tire ain’t gonna work for me. The Mickeys are discontinued now and honestly they suck. No sidewall so unless they’re good and hot she just blows them off and dances around a bit. I’d love to run a 15” wheel but I’m not into dicing up the suspension to make em work. I don’t know where I am going to go with it but need to definitely put some different sneakers on her. I’m thinking about throwing the other set of wheels on her but I’m positive I’ll hate it. I’m not into running spacers so I’m definitely getting another set of wheels fabricated. I’m open for suggestions but the rears have to be at least 14-15” wide. We’ll see. |
BeWare POA Site Supporter Prowler Junkie From:Acworth , Georgia , USA |
posted 06-15-2023 12:03 PM
I’m no expert but I think the rotors are also too large to accommodate a 15”wheel. After all you went through I can’t believe that you even considered selling , especially so soon. But I’ guess I’ve seen others do similar. This message has been edited by BeWare on 06-15-2023 at 12:03 PM |
cdeluca99 POA Site Supporter Prowler Junkie From:Patchogue, NY, USA |
posted 06-15-2023 03:15 PM
I have built so many, I never get attached to any of them. If the right person comes along with the right number, she’s gone. I just think I need to spend more time in the car. We’ll see how it plays out. Going to Mercato Sunday for a pretty big event. All the cars parked along the street. I’ll definitely take pictures this time. |
WildCat POA Site Supporter Prowler Junkie Personal ScrapBook From:Oldest kid in the neighborhood..... East side Indy, Indiana, USA |
posted 06-15-2023 07:29 PM
Not sure the offset but think Mike had 15” wheels on the back of his drag car When I had my wheels out to be chromed found a 17 that I could put on to get it to paint shop It looks cool as it is but can see the issues with them also ------------------ |
DublinOH POA Site Supporter Prowler Junkie From:McMurray, Pa, USA |
posted 06-15-2023 09:25 PM
I run a 355/30-19 rear tire on 19x13" viper wheels. I had to have custom adapters made. If you have new wheels speced out, this is the way to go. There will always be someone out there making rear tires for vipers. |
cdeluca99 POA Site Supporter Prowler Junkie From:Patchogue, NY, USA |
posted 06-16-2023 06:30 AM
Car looks great man! Can I run an 18” wheel on the rear? Seen a 355 30-18 tire yesterday. I remember when you and I were having this exact same conversation in my father’s driveway lol thanks for the feedback Steve I do appreciate it. I just refuse to run any type of spacers in my car. Chassis and suspension configuration is my forte, no spacers anywhere. Running Viper wheels you have no choice, they’re 6 lug. I spoke with the guy who made my wheels, says 18” x 13 is no issue to fabricate. I can play around with backspacing to get a nice dish on the wheels. But can I run 18” on the rear? Other option is run my old wheels and cut up the rear 20” and make it a true 3 piece wheel. I can get inner and outer wheel halves from MHT or American racing and build any wheels I want. Thanks again guys I hope everyone has a great weekend and great Father’s Day as well. |
DublinOH POA Site Supporter Prowler Junkie From:McMurray, Pa, USA |
posted 06-16-2023 08:51 AM
Not really sure about 18"s. The 19's are fine. The car is currently in FL. I'm flying down July 1 to retrieve my wife. I'll stop at the garage and try to get some good pics and measurements. |
cdeluca99 POA Site Supporter Prowler Junkie From:Patchogue, NY, USA |
posted 06-16-2023 09:59 AM
Awesome! Thank you so much. Safe travels as well |
cdeluca99 POA Site Supporter Prowler Junkie From:Patchogue, NY, USA |
posted 06-16-2023 10:09 AM
Dude you are running a 27” tall rear tire, you have gears? There is no way you run highways! My 29” tires with the gears on Rt 75 OMG tach was screaming staying up with traffic. That thing must blast out of the hole like a bat outa hell!!!! Thank you again for your help. I appreciate it and look forward to seeing you again when you get back down here.
quote: |
cdeluca99 POA Site Supporter Prowler Junkie From:Patchogue, NY, USA |
posted 06-17-2023 07:16 AM
Had to hit the ATM this morning. Car is running phenomenally. I’m definitely keeping her. We definitely need pictures of the 2 hi boys together ASAP Steve! This message has been edited by cdeluca99 on 06-17-2023 at 07:20 AM |
cdeluca99 POA Site Supporter Prowler Junkie From:Patchogue, NY, USA |
posted 06-21-2023 09:46 AM
Put some banners up this morning LD!!! I have about a dozen more but I’m getting ready to put all my tools up on the other wall! Stay tuned!! |
This topic is 18 pages long: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 All times are CT (US) Top of Page Previous Page | Return to Off Topic Discussion next newest topic | next oldest topic |
All material contained herein, Copyright 2000 - 2020