Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Prowler-Parts.Com | Prowler Products By Gary | Tom Mills / Jefferson Auto | Prowler-Products Trunks |
Click here to return to the Prowler Online Board Main Page Topic Closed |
ProwlerOnline, Plymouth/Chrysler Prowler Discussion Forum
Prowler Reproduction Parts Discussion Center cap repair (Page 2)
|
Bottom of Page This topic is 8 pages long: 1 2 3 4 5 6 7 8 |
next newest topic | next oldest topic |
Author | Topic: Center cap repair |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 04-22-2011 07:58 AM
Dick is back from vacation and we are all caught up on orders. He changed from using PVC pipe as the ring, to using aluminum. He thinks it will be more stable and a more precise. I currently have 9 repaired caps ready to go so if you need some, let me know. I can mail them to you and you can then send me the broken ones and check. I am not going to take Paypal any longer. They take a healthy chunk for each transaction. If you have extra broken center caps laying around, I will buy them for $ 15 each. That helps me keep a supply on hand. |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 06-07-2011 08:02 PM
This is the new and improved version of Dick's repair. It is aluminum instead of PVC. I will attempt to load another picture but it is very iffy for me these days. This message has been edited by ed monahan on 06-07-2011 at 08:03 PM |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 06-07-2011 08:04 PM
|
Dlugiprowler Prowler Junkie From:Wesley Chapel, FL (Tampa Bay Area) |
posted 06-23-2011 09:54 AM
My four will be shipped tomorrow. Thank you for starting this post. It is an amazing service. Thank you. |
ROADKAT POA Site Supporter Prowler Junkie From:LAS CRUCES, NEW MEXICO, USA |
posted 07-16-2011 01:44 PM
Ed, I am delighted to see the post on the center cap repair. I have two on the car and one on the trailer that are broken. However, I would like to have all 6 repaired at this same time. Can you tell me the cost and shipping charge for six. I will get them shipped off to Dick Linneman as soon as I hear from you. Thank you Tom MacGugan Roadkat |
ROADKAT POA Site Supporter Prowler Junkie From:LAS CRUCES, NEW MEXICO, USA |
posted 07-19-2011 10:46 AM
Ed Monahan, I hear from my good friend Larry Salzman in Arizona that you may be on vacation in Alaska, as the reason that I have not had a response from you. That is great, hope you are having a good vacation! I am taking your advice, and shipping six center caps (4 for the car and 2 for the trailer) directly to Dick Linneman for repair. I am anxious to get them repaired as I have four of them taped on with packing tape. Told Dick in a note to him, enclosed in the package, that I sent $160.00 the cover the repair and return shipping. If this does not cover it, let me know and I will send more money. I really appreciate the great service you men are offering! Thank you, Tom MacGugan Roadkat |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 07-20-2011 07:14 PM
Tom, we are in B C tonight. We were on a ship in Alaska for 7 days. Internet was available for only $ 100 for 250 hours. I didn't feel my feeble posts were worth that kind of money. Dick will take great care of you. Hopefully your trailer rims are the exact same as your car wheels. I have had folks tell me theirs were different than the car rims. I will be home next Wed, I think. You will have them back from Dick by then, probably. |
ROADKAT POA Site Supporter Prowler Junkie From:LAS CRUCES, NEW MEXICO, USA |
posted 07-20-2011 09:53 PM
Ed, Thank you for your response! I figured you were out of touch, especially after talking to Ally Cat. The hub caps are all the same. I carfully examined the to make sure they were identical. Hope your are enjoying your vacation! Tom Roadkat |
StingRay POA Site Supporter Prowler Junkie From:Elk Grove Village, IL, USA |
posted 07-24-2011 12:44 AM
quote: Does that qualify for statement of the year? This is good info, about the center caps and not, according to AC, Ed being out of touch ... may need to send a set in as a "just in case" set. Thanks! This message has been edited by StingRay on 07-24-2011 at 12:47 AM |
ROADKAT POA Site Supporter Prowler Junkie From:LAS CRUCES, NEW MEXICO, USA |
posted 07-25-2011 03:39 PM
I received my caps back today, could not beleive the fast turn around! I am very pleased with the workmanship, and the way the caps just snap firmly on. Thank you very much Ed for recommending this fix. I sent Richard Linnemann an e-mail thanking him for his great work! If anyone has broken cap rings, I suggest you cannot go wrong with this fix. Thank you again Ed and Richard. Tom MacGugan Roadkat Las Cruces, NM |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 07-25-2011 04:49 PM
Let me repeat, I really have nothing to do with this solution. Dick came up with it, called me and asked me to post it since I am well known and he is not and he doesn't really do computers very much at all. I appreciate folks thanking me, but I am just the messenger. If anyone EVER has a problem with a center cap, I am sure Dick will fix it free as long as he is alive. He has repaired around 350 so far, I think, and did have one problem with a bad glue job on a very early one. If you have a problem, let me know and I will tell him about it. |
ALLEY CAT POA Lifetime Site Supporter Prowler Junkie From:mesa, Arizona, USA |
posted 07-27-2011 09:03 AM
quote:
So what are you referring to about my info not being good? |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 07-30-2011 09:43 PM
A/C, I think it was a play on words about me being out of touch, in general. Anyway, Super Dave is looking for a broken center cap for a project. I don't have any at this point so if someone can help him out, it would be appreciated. Dave is a great guy and would help out any Prowler owner so if you can help him out, please do. Otherwise I will pull one out of the next batch that comes in for repair, for him, and replace it with one of my extras, already repaired. |
TFischer POA Site Supporter Prowler Junkie From:Van Alstyne, Texas, United States |
posted 07-30-2011 10:05 PM
Ed, I would like to get my last two caps repaired, so let me know if you plan on going to Woodward and I will bring them along and swap them out. I think I'm driving the Challenger up instead of the Prowler since the kids are coming with me. I can keep one of the caps out and get it to Dave if he hasn't already found one. T |
beachcat BANNED From:Ontario, Canada |
posted 07-30-2011 10:12 PM
I have broken centre caps available. |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 07-30-2011 10:25 PM
Tami, I still don't know if we are going to make it. Sandy's job has been teetering on the edge for almost 2 years and now it looks like they might be ramping it UP again instead of dismantling the place. It is on 88 acres abutting a high priced city. The land is worth big bucks and rumor has it the county is going to sell. If they are closing VERY soon she won't want to take off but not it is looking like things are stable. We have a new tenant moving in across the street on the 15th or 16th from Utah. We need to be here for that. Sandy's grandson is getting baptized on the 12th, I think so that is another road trip. TMI but I don't know when we will know for sure. I would like to come up and hopefully we will know this coming week. |
SuperDave POA Site Supporter Prowler Junkie From:Murphy, TX, United States |
posted 07-31-2011 10:58 PM
quote: Thanks for the kind words Ed, I do appreciate that! I am looking for one chrome center cap for a project that I am working on. It doesn't matter if any or all of the tabs are broken, it'll work fine if it has a decent face. I'll contact Tami and Beachcat about their caps, thank you both for the replies! Dave |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 07-31-2011 11:52 PM
I only say that when it is true. I will get one for you if you don't get another one first. |
TFischer POA Site Supporter Prowler Junkie From:Van Alstyne, Texas, United States |
posted 08-01-2011 08:28 AM
One of mine has one tab completely broken and the other one is fine, but I want to replace them. Dave, when I get replacements from Ed then you can have mine. T |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 08-26-2011 01:46 AM
Dave, did you get a center cap yet? |
TFischer POA Site Supporter Prowler Junkie From:Van Alstyne, Texas, United States |
posted 08-26-2011 02:53 PM
I sent him a PM last week and asked, but I never heard from him. So I'm assuming he did. T |
SuperDave POA Site Supporter Prowler Junkie From:Murphy, TX, United States |
posted 08-26-2011 09:10 PM
Beachcat did send me a center cap, I am covered! Thanks to all three of you for offering, I do appreciate it. I'll post pictured of my project as soon as I wrap it up. Dave |
mmmokita Prowler Newbie From:Blaine, MN |
posted 10-03-2011 12:17 AM
Hello, I lost one of my center caps and am looking for a complete replacement. Do you still have some available? If so - What is the cost with shipping? What is the easiest way to make payment? Thanks, |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 10-03-2011 01:27 AM
I sent you a PM with the info. If you can't recieve PMs yet, make 9 more posts and you will recieve it, or post your email address and I will send you an email. |
mmmokita Prowler Newbie From:Blaine, MN |
posted 10-03-2011 03:53 AM
Yeah - Im not able to see the pm you sent. If you want, you can contact me at mmmokita@yahoo.com Thanks, |
This topic is 8 pages long: 1 2 3 4 5 6 7 8 All times are CT (US) Top of Page Previous Page | Return to Prowler Reproduction Parts Discussion next newest topic | next oldest topic |
All material contained herein, Copyright 2000 - 2020