| Bottom of Page | next newest topic | next oldest topic |
| Author | Topic: Ball joint recall |
ed monahan                    POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 04-04-2007 10:01 PM
    
How many of you still have not had your ball joints replaced? Are you going to have it done or just ignore it. If ignoring it, why? I know of a couple of local owners who are contemplating having it done in the near future. |
1buddyc POA Site Supporter Prowler Junkie From:San Antonio Texas USA |
posted 04-04-2007 10:07 PM
I still need to have both cars done.... |
tangled up in BLUE POA Site Supporter Prowler Junkie From:New Castle, Ind |
posted 04-04-2007 10:18 PM
Tangelo Kat was done before I bought it... Kandi Kat was done a long time ago and never driven since...the tech was very careful, but it made me nervous to watch it just the same Yelo Kat has never been done and probably never will...don't really want it touched by anyone in a garage with any kind of tools
|
J King Prowler Junkie From:Whitehorse,Yukon,Canada |
posted 04-05-2007 09:09 AM
What Prowlers required the recall, all of them or just certain years? |
GaryE POA Site Supporter and Vendor Prowler JunkieProwler Products by Gary From:Laguna Woods, CA, USA |
posted 04-05-2007 09:13 AM
The ball joint recall is something that everyone needs to complete. I have looked at to many of the old ball joints that are real scary. There have been to many accidents that could have ended up very serious. I recommend that if you have not done the recall, you schedule it before your drive your car this spring. ------------------ |
|
GaryE POA Site Supporter and Vendor Prowler JunkieProwler Products by Gary From:Laguna Woods, CA, USA |
posted 04-05-2007 09:14 AM
All Prowlers require the recall ------------------ |
Piddler Prowler Junkie From:Anniston Al |
posted 04-05-2007 09:14 AM
quote: I think it's for all of them. ------------------ |
cnilejr Prowler Junkie From:Punta Gorda Florida |
posted 04-05-2007 09:18 AM
I purchased my prowler last summer. How can I find out if the ball joint recall was completed or not? |
Mike Downey POA Site Supporter Prowler Junkie From:Atlantic, IA |
posted 04-05-2007 09:24 AM
Check with your Chrysler dealer. He can run the VIN and tell you if it has been done or not.
quote: |
Howard POA Site Supporter Prowler Junkie From:Valencia, CA, USA |
posted 04-05-2007 09:42 AM
cnilejr Use this link and follow the instructions. |
|
quincy POA Site Supporter Prowler Junkie From:Fairfield Glade, TN. USA |
posted 04-05-2007 03:02 PM
Ed has posted a very important safety notice. IF YOU HAVE NOT HAD THE RECALL, GET IT DONE. IT WILL BE COVERED UNDER WARRANTY REGARDLESS OF AGE OR MILES. IF YOU ARE NOT SURE, HAVE THE DEALER RUN THE VIN # TO VERIFY. Loosing a lower ball joint at freeway speeds can be fatal! |
terry chapman Prowler Enthusiast From:Goodwood,Ontario,Canada |
posted 04-05-2007 04:28 PM
I bought my 2000 last October with 9000 miles on it and the ball joints were falling out of it. I mentioned the ball joint recall to the dealer and they changed them before I took delivery of the car. |
bjprowler POA Site Supporter Prowler Junkie From:Clarksville,Ohio,USA |
posted 04-05-2007 04:49 PM
Mine is going into the shop in about 10 days....I shouldn't have put it off this long (25K miles) but don't want to push my luck any further.... If you've not had yours done, check with others for a recomendation of where to take it but be sure your mechanic is certified on Prowlers.....Truth is, you'll probably be more picky about who does this than you were when you picked out the doc to do your vasectomy! |
BeWare POA Site Supporter Prowler Junkie From:Acworth , Georgia , USA |
posted 04-05-2007 05:09 PM
Ours was done a long time ago. No damage was done changing the ball joints. And we have the painted 99 A Arms . I saw a ball joint failure at the Smokies event. It was not a pretty sight and a lot more damage was incurred than could possibly be inflicted during the ball joint change. This message has been edited by BeWare on 04-05-2007 at 05:11 PM |
bowton POA Site Supporter Prowler Junkie From:Walla Walla, WA. USA |
posted 04-05-2007 05:34 PM
Purchased my Woodward a few weeks ago. Thanks to the posts on POA, I became aware of the ball joint recall. I had my local dealer run the VIN and the good news is that the ball joints were replaced in August of 2003. Ordered one of Larry Lord's Wonderbars this morning. I have got to quit reading the posts. You people are costing me $$$. Dust cover is next, etc., etc., etc., etc.,..... Bowton
|
Dave Mills POA Site Supporter Prowler Junkie Personal ScrapBook From:Johnstown, PA, USA |
posted 04-05-2007 07:12 PM
Mine were replaced years ago with no problem. |
Skullrodder POA Site Supporter Prowler Junkie From:Middle River, MD. USA |
posted 04-05-2007 07:54 PM
Bought my 97 last August just checked the web site posted here. Neither factory recall, (lower ball joints or fuel rail o-rings) done on my car. I will attempt to schedule ASAP with local dealer. 6547 miles with Wildwood and Woodward comming up....Thanks to everyone for the GREAT information and advise. Charlie. |
392HEMI POA Site Supporter Prowler Junkie From:The Villages, Fl. |
posted 04-05-2007 08:35 PM
Man, get those fuel rail O rings done. If they spring a leak on hot engine, Burn baby Burn!! |
Marty Usher POA Site Supporter Prowler Junkie From:San Antonio, Texas, United States |
posted 04-05-2007 09:07 PM
The small risk of some damage being done during the recall repairs can be minimized by explaining your concerns to the service staff up front. These risks of damage are nothing compared to the feling you'll have seeing your Prowler listing to one side with a front wheel sitting at a 30% angle and having the front fender touching the nose piece! That's not to mention the sound when the ball joint actually fails and the steering wheel jerks in your hands! PLEASE do yourself a favor and get the ball joints replaced! This message has been edited by Marty Usher on 04-05-2007 at 09:07 PM |
|
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 04-05-2007 09:55 PM
You can actually look at the bottom of the ball joint and read a number and that would tell you if the recall was done. Unfortunately I can't read the number on mine since I am looking into a mirror to see it. I will try it in the sunlight but I think it was posted in the past. |
Northern Cat POA Site Supporter Prowler Junkie From:Stoney Creek, Ontario, Canada |
posted 04-06-2007 04:47 PM
Ed, I'm on my second set of Ball Joints...and no they (DC) don't pay for it...So keep an eye on your ball joints and have them checked often.. Don ------------------ |
|
Skullrodder POA Site Supporter Prowler Junkie From:Middle River, MD. USA |
posted 04-06-2007 08:11 PM
Talked to the local dealer today & scheduled appointment for both fuel o-ring and ball joint replacement on the 19th. They also ran my VIN and said the frame weld repair was completed on my car. Very helpful and assured me they have a senior mechanic on staff familiar with Prowlers. Thanks again for the advise. Charlie. |
|
Prowler X POA Site Supporter Prowler Junkie From:Tucson, AZ USA |
posted 04-07-2007 09:08 AM
I wonder how the pending/possible sale of Chrysler would affect such recalls and extended warranties? I'm guessing nothing, but if I had any warranty work to be done, I'd do it now to avoid any hassles. Warren |
All times are CT (US) Top of Page Previous Page |  Return to General Prowler Discussion next newest topic | next oldest topic |
  |
|
Contact Us | Prowler Online Homepage
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP
