posted 11-20-2003 08:46 PM                  

then we can arrange something.

posted 11-20-2003 10:47 PM                  

I got a pair of third brake lenses tonight in the mail. I checked them out.

Good news: I can make these in any color no problem. I will make a mold for this item this weekend. With some minor elbow grease, the lnes comes out and exposes the LED array which is red. So a clear lens can placed there.

Bad news: they are larger than they look in the picture so the price will be a bit higher. Probably in the $80-100 range but not sure until I measure the weight of the lens. Ther lens also will require a 3 part mold, not a 2.

Also, I posed a question to the owner about polishing off the Chrysler logo. If he says its ok, I can have the first piece done by Saturday evening. if he wants to keep his original lens intact and original, I will have to make a copy of it, then polish off the logo on the copy, then make another mold so that means I wont have the first part until Monday. I will have that copy but I won't be able to sell it because of the logo.

Thanks guys.

Looks to be a good project and will yiled the results I typically expect.

Get your money ready!

posted 11-20-2003 11:59 PM                  

Thanks.

"edit" didn't realize Saturday was the last day of the GU6 soccer season so the day i spacked. will finish up Sunday and Monday. Sorry.

posted 11-25-2003 06:43 PM                  

I can make the parts, but I will have to order two spares from Chrysler or wherever.

Anyone have the part numbers for the side markers?

Thanks.

William, i will return the marker if you like. Thanks for sending, it just has too much cutting done to it. I coudl use it but it appears the marker is surface mounted and the edges woudl be seen so i need a near 100% quality piece. i may be able to use the back portion though.

What i need to know now is the part numbers. also, if the left and right are the same, then i can definitely use the back half and only have to buy one marker to cut up and make the front half.

i will do some searching, also i will be at chrysler dealer tomorrow so i will check with them too.

posted 11-26-2003 08:35 AM                  

I live in Ventura County and have changed my side panels.

I can loan you my factory panels or just the side markers which have not been removed (I will remove them) if you still need a set to make a mold from.

The earliest I could get these to you would probably be Friday afternoon (3pm or so) or Saturday. Or you could pick them up (I am about 15 minutes West of Magic Mountain) if you want them sooner.

Just email me or call me on my cell phone (805) 276-0041 to make arrangements.

------------------
Cliff Watson See My Prowler Page
2K1 Mulholland, Colorshift Flames, Mud Flaps, TGF Side Panels, TGF Bumper Covers, Eric Wolf Chrome Tranny Cooler, Blueberry Shimmers, Front Ceramic Pads, Homemade Top Brace, SSS Muffler, Weekender.
2001 Dakota SLT+ CC (Patriot Blue)
1998 Durango SLT+ (Intense Blue)
X - 1998 Honda Accord
X - 1991 Dodge Spirit
X - 1965 Ford Mustang (289)
X - 1994 Dodge Daytona Turbo
X - 1971 Ford Pinto (The Rust Bucket)

posted 11-26-2003 09:36 AM                  

i can guarantee a clear set but not the return of the original.

posted 11-26-2003 11:25 AM                  

$70 for the pair.

04786242AB $32.60
04786243AB $32.60

it will be a bit before i order those considering my engine problems and chrysler customer service.