posted 10-02-2006 09:55 PM                  

Will these fit the Prowler wheels?
http://c gi.ebay.com/ebaymotors/American-Racing-Torque-Thrust-Carlisle-Knockoffs-TTO_W0QQcmdZViewItemQQcategoryZ43961QQihZ002QQitemZ120021365195QQrdZ1QQsspagenameZWD1V

posted 10-03-2006 08:25 AM                  

Torque Thrust Central

I am a one man operation. I work from home and do not have set hours or a store. I come and go when I have a need.
It is hard to concentrate on running equipment and talk on the phone. I can answer a lot of questions late at nite or early in the AM and send pictures & written information to my customers with e mails.
I do give my phone number out when its needed.
I get an average 20 to 30 emails a day and I delete all messages as soon
as I answer them. Please use "REPLY" when answering my mail to you so I
can remember what we are talking about.
If you are trying to make something work on your wheels or wheels on a carand cannot find the parts. Sent pictures and measurements of parts & wheel as it makes life easier for me to visualize your wants.
Take clear close ups as I dont care about anything but the wheel or caps.
In some cases I may already know how to get the same result as you want.
I ask questions of the customer because I am trying to save run around time for both of us. I have found its easier to have a question , pictures and measurements all in the same email to get the correct answer.
* * *
Please visit my web page. Click on the address below & it will take you to Torque Thrust Central.
http://www.torquethrustcentral.com/

Thank You
Terry

posted 10-03-2006 12:19 PM                  

quote:

---

Originally posted by Bob Goetz:
I have a set of these and they will not work on the stock wheels.

---

posted 10-04-2006 02:52 PM                  

Does someone have a damaged wheel they can send him??? I will get you his address.

Howard : I saved all your pictures to my files.
Is this wheel made for just the prowler?
I have some contacts at American and have asked for some information on the subject.
I am a one man band and sort of stay behind.
I will be working on this.
Terry

posted 10-09-2006 09:39 AM                  

quote:

---

Originally posted by 392HEMI:
GM's Styled Wheels had a center cap that fit on an extended tri-pod which affixed to 3 of the lug bolt studs. If an extender can be fabricated for the front seperately from one for the rear bolt pattern then perhaps the center cap can be assembled in 2 pieces. Both the spinner and cap would probably be affixed to the extender by 3 chrome head screws. It could work. Awaiting full address and I will try to find the spec's. for the bolt pattern centers for front and rear. Jim

---

Thank you for getting this in the works for us.
How much further would this make them stick out on the Kat? If I purchased a set, I would also want a set for the trailer. Would it work on those too?