Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
| |||||
Want to register? |
If you have previously registered, but forgotten your password, click here.
------------------ I will have to check with Dick to see if he is interested in making more. He was out of town and I am not sure if he is back. I meant all the info i get including you...but i would build u one also... Nice work, what goes on top of it? robin Need to find a place for that (transporter) here is 401kat's invention. nice job
StingRay Creative! Frees up floor space for sure 401KAT Thanx for the pics robin....yes thats 20 min of welding with a small receiver hitch and another bracket....I'm sure someone on here has done this before...just threw it out there in case someone had same problem as i did with clutter...paint on this rare get-n-go is flawless...scared me being in floor...lol...jim quincy Excellent idea. Can you describe the various process steps to build one please? And a BOM. (bill of material)
Any concern with lagging it to only one wall stud?401KAT $15 dollar swapmeet used hitch..cut off most of rear of it ..I had an old air bag bracket I cut back piece off of ..welded...3 holes with lags...Over kill on lags IMO....one stud fine...20 mins start to finish...
Take this and weld 6-8" flat bar on rear...drill ...lag..I just happened to have old hitch
http://www.ebay.com/itm/Trailer-Hitch-Reducer-Adapter-2-to-1-1-4-Receiver-Tow-Towing-Big-to-Small-NEW/171973320843?epid=1334524577&hash=item280a68a08b:g:ntUAAOSwWLFZogcg&vxp=mtr quote:
Originally posted by quincy:
Excellent idea. Can you describe the various process steps to build one please? And a BOM. (bill of material)
Any concern with lagging it to only one wall stud?u00tjs2 If you don't weld or have a welder, Dick in Cinncy- Sterling Industries- sells a ready made Weekender storage bracket. Dick or Ed M can provide Price.
[img]http://www.prowleronline.com/ubb/smilies/blueprowl.gif[/img]quincy Hopefully Ed M. will read this and post a reply!
The creativity of Prowler Owners never ceases to amaze me!!ed monahan http://www.prowleronline.com/ubb/Forum6/HTML/009366.html
There are pictures on page 2.401KAT Those are nice ....Quincy either the double end or single will work....after mounting mine there is no lateral movement...mine could be shortened to get it closer to wall...but where i mounted it ...it wasn't a problem...if u need one pm me and i will build u one or any one else for that matter ....no problem...no labor charge....as much info as i get from this sight (that includes u ED) least i could do....jim 401KAT heres the last chassis i built so welding no problem. ed monahan Thanks. I don't own a week-ender but I appreciate the offer. 401KAT
quote:
Originally posted by ed monahan:
Thanks. I don't own a week-ender but I appreciate the offer.WildCat quote:
Originally posted by 401KAT:
heres the last chassis i built so welding no problem.401KAT 68 short wide...actually sold truck before finished...a quality builder close to me is finishing truck..lays the frame....
All material contained herein, Copyright 2000 - 2020