| Bottom of Page | next newest topic | next oldest topic |
| Author | Topic: Need Front Inner Tie Rod |
GaryE                    POA Site Supporter and Vendor Prowler JunkieProwler Products by Gary From:Laguna Woods, CA, USA |
posted 07-19-2017 05:45 PM
    
I am in need of new or very good used Inner Tie Rod for the Prowler. I have a customer with a bad one. Would appreciate any help. ------------------ |
alrtg POA Site Supporter Prowler Junkie From:Westminster, MD, USA |
posted 07-19-2017 06:33 PM
Looking in the Parts Catalog, I only see one Tie Rod listed and it is listed as "Tie Rod Ends" in section 019 figures below. Figure 019-305 Tie Rod Ends Part number 4897 860AA is the TIE ROD, Steering The same number is listed in both illustrations and there appears to be no "Inner" Tie Rod End, only Outer Tie Rods but they are referred to only as a Tie Rod. With this in mind, there are two vendors currently offering this part on E-Bay. The first one http://www.ebay.com/itm/Genuine-Chrysler-Prowler-Tie-Rod-End-4897860AA-/263025412705?epid=84078663&hash=item3d3d894a61:i:263025412705&vxp=mtr has a "Buy it Now" price of $106.63 each including free shipping from Dallas Texas, and claims to have four available at the moment. The second one http://www.ebay.com/itm/steering-tie-rod-end-prowler-plymouth-chrysler-all-years-/302384224629?hash=item4667811975:g:g~IAAOSw3ydV6Y4D&vxp=mtr has a starting bid of $150.00 plus shipping of $13.91 from Troy Michigan but does not show a quantity above the one currently offered. This auction ends in two days. Both appear to be the Tie Rod by looking at the illustration on one and the part number on the other. The first seller has a 97.8% Positive feedback score with 88 sales while the second has a 100% Positive feedback score with 658 sales. Either one might meet your needs if I understand your post correctly. |
Tomcal POA Site Supporter Prowler Junkie From:Commack, NY, USA |
posted 07-19-2017 06:51 PM
Old post with answer.... ivegotsugar I had my driver side inner tie rod replaced back in Aug 09 ... {Oops I've corrected the Phone #} Thanks Mickey ! Also the inner tie rod will be a different color than the original rod ...Its lighter in color This message has been edited by ivegotsugar on 02-11-2010 at 01:09 AM |
|
Tomcal POA Site Supporter Prowler Junkie From:Commack, NY, USA |
posted 07-19-2017 06:57 PM
Inner Tie Rod End #MR519046 Available on Amazon..... http://www.amazon.com/Febest-Chrysler-Axial-Joint-Mr519046/dp/B00C6N0O32 This message has been edited by Tomcal on 07-19-2017 at 06:58 PM |
Richnew41 POA Site Supporter Prowler Junkie From:Wind Gap, PA |
posted 07-20-2017 10:43 AM
Just fantastic info!!!! Thank You Tom!!!!!!!!!!! |
|
Tomcal POA Site Supporter Prowler Junkie From:Commack, NY, USA |
posted 07-20-2017 11:22 AM
Also available at Rock Auto Parts, complete with boot, zip ties, retaining clip and grease. They show complete steering rack assembly as well, although I have not researched if this rack fits our Prowlers. |
kees POA Site Supporter Prowler Junkie From:Capelle, Zuid Holland, Netherlands |
posted 07-20-2017 11:39 AM
FYI http://www.prowleronline.com/ubb/Forum1/HTML/023022.html Kees |
|
GaryE POA Site Supporter and Vendor Prowler JunkieProwler Products by Gary From:Laguna Woods, CA, USA |
posted 07-20-2017 12:44 PM
I have ordered 2. Thanks for your help. They have been discontinued by Chrysler. ------------------ |
|
Tomcal POA Site Supporter Prowler Junkie From:Commack, NY, USA |
posted 07-20-2017 12:54 PM
Gary, just curious, which brand did you order? Keep us updated on how install went and quality of product. Thanks.... Tom |
NiteProwl64 Prowler Enthusiast From:Florida |
posted 07-20-2017 01:00 PM
I have always had good luck with Napa's Master Ride series... ES3607 is the number. $34.00 and works like a charm. Just saying. |
robin POA Site Supporter Prowler Junkie From:St Thomas Ontario Canada |
posted 07-20-2017 06:40 PM
http://www.moparamerica.com/chrysler/prowler/4897860aa/2001-year/base-trim/3-5l-v6-gas-engine/steering-cat/steering-gear-and-linkage-scat/?part_name=outer-tie-rod |
|
Richnew41 POA Site Supporter Prowler Junkie From:Wind Gap, PA |
posted 07-20-2017 11:22 PM
I ordered the Febest as I've been impressed by there quality with other parts.... I will report back on them once received |
|
GaryE POA Site Supporter and Vendor Prowler JunkieProwler Products by Gary From:Laguna Woods, CA, USA |
posted 08-31-2017 05:43 PM
Sorry to say I am back where I started. I ordered the Febest MR519046 replacement. The quality is fine but have two problems to overcome. There is not enough threads on the adjustment end of the replacement. That can be fixed by turning some more threads on the shaft. The second problem is a little more difficult to solve as the threaded end that screws into the steering box is to long. So, I am back looking to see what be out there to solve the problem. Mopar has discontinued the part. Next I am going to check out the Napa. ------------------ |
padroo POA Site Supporter Prowler Junkie From:Chesterton, IN, USA |
posted 08-31-2017 08:26 PM
Gary, will this help? http://www.prowleronline.com/ubb/Forum1/HTML/023022.html |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 09-01-2017 12:01 AM
I would bet Dick Linnemann could take care of both problems in short order. |
MDProwler POA Site Supporter Prowler Junkie From:Fallston,MD USA |
posted 09-12-2017 05:16 PM
Pm sent Gary |
All times are CT (US) Top of Page Previous Page |  Return to General Prowler Discussion next newest topic | next oldest topic |
  |
|
Contact Us | Prowler Online Homepage
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP
