Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Bottom of Page | next newest topic | next oldest topic |
Author | Topic: Center Caps |
dh Prowler Newbie From:Clarkston, MI., 48348 |
posted 10-19-2005 07:55 PM
I broke one of my Wheel Center Caps.... Is there another solution to this problem? Does anyone make a better Center Cap?? Thank you, |
RED5 POA Site Supporter Prowler Junkie From:USA |
posted 10-19-2005 08:24 PM
I see them on ebay for pretty high prices. I would guess the best place is to get them is one of our 2 friendly dealers where we get parts for 10% over their cost. Or you can get a set of spinners but the price on them is up there as well. |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 10-19-2005 08:27 PM
I don't know exactly what you mean by "I broke it" but if it is the back of it, (the circular wire or the 5 clips) you can repair them. Most of them have been repaired since they all break. You can hot glue them. If it is broken in half, you are probably out of luck. There have been LOTS of posts about repairing them. |
Kraut POA Site Supporter Prowler Junkie From:Plymouth, MI |
posted 10-20-2005 07:23 AM
Another solution to broken center caps is to break all the tabs off and add wheel spinners. Let me know if you would like to have the drawings for this modification free of charge. I can e-mail the CAD file to you. |
RED5 POA Site Supporter Prowler Junkie From:USA |
posted 10-20-2005 07:55 AM
I have not seen spinners that use the caps....very nice. Must have missed that at woodward. |
Snoman unregistered Admin Use |
posted 10-20-2005 07:57 AM
quote: I would like those please |
Georgia Prowler Prowler Enthusiast From:Winterville, GA, USA |
posted 10-20-2005 08:08 AM
Chryler gets a big for the whole wheel issue from my perspective...The Prowler TECH at the dealership broke the first two with his handy screwdriver. (I've learned to STAY WITH THE CAR!) Anyway I bought 3 extra sets and try to repair them as needed. Get some spares dh.... but the spinners are nice and probably not as expensive as you think after you buy 12 of them! Also just got my wheels replaced. The dealership let me keep the "returned" wheels as they said Chrysler didn't want them back. I'm going to try to adapt them to my trailer....it was a nice touch from the dealer though. ------------------ |
YELLER CAT POA Site Supporter Prowler Junkie From:FLORIDA, USA |
posted 10-20-2005 08:33 AM
GOOD MORNING Dick Howard... The ONLY "real" solution for the ongoing breakage of the Plastic OEM Center Caps is to replace them with the Billet Aluminum Center Caps. These custom designed caps are still available... they are handcrafted and CNC Machined specifically for the Prowler, complete with the Chrome Lug Nuts. If you are interested in some of the various Kat Owners pictures and comments... just click on "search" and fill in with "Billet Center Caps" for this information. If you need more information or to place an order, PLEASE call me toll free @ 800 669 3540. THANKS, Jay |
Kraut POA Site Supporter Prowler Junkie From:Plymouth, MI |
posted 10-20-2005 08:37 AM
Snowman, send me an e-mail (rainermueller@comcast.net) and I will forward the files to you. |
pumpkin POA Site Supporter Prowler Junkie Visit Waleke's World Personal ScrapBook From:Las Cruces, NM, USA |
posted 10-20-2005 09:04 AM
DH, I have the Billet center caps. I think its the the way to go- imho. |
carbuff Prowler Junkie From: |
posted 10-20-2005 10:56 AM
Removed. This message has been edited by carbuff on 06-09-2006 at 12:37 AM |
TOM GULYAS POA Site Supporter Prowler Junkie From:TAYLOR, MI USA |
posted 10-20-2005 02:11 PM
HI THERE - AS FAR AS ANYTHING BETTER? ONLY THE SHADOW KNOWS FOR SURE! BUT, IF THE CAR IS STILL UNDER A WARRANTY THEN TAKE THE CENTER CAP AND THE CAR TO YOUR LOCAL CHRYSLER DEALERSHIP AND THEY WILL REPLACE IT FREE OF CHARGE. |
YELLER CAT POA Site Supporter Prowler Junkie From:FLORIDA, USA |
posted 10-20-2005 06:14 PM
Billet Aluminum Center Caps shown on a front "painted" Prowler wheel... THANKS, Jay |
Jerry Finuf POA Site Supporter Prowler Junkie From:St. Charles,MO. USA |
posted 10-20-2005 07:16 PM
quote: These 2 dealers that we can get parts for 10% over cost. |
obi-wan Prowler Junkie From:Los Altos, CA, USA |
posted 10-21-2005 01:55 PM
There is a simple way to keep the caps from breaking. I've modified the caps for several years now and had countless caps off. You will need a belt sander(or be very good with a file). Simply take about a mil. of the pointed edges of each "prong" of each cap. This will diminish the overall dia. and thus reduce the "spring". This allows you to remove and replace the caps with less stress on each of the prongs. There is also a trick to removing and putting the caps on. Be sure to use a plastic 'pop'tool as shown in the service book. I have these for 5.oo Inc shipping. I align the tool gap area of the cap to the air valve so I can easily find where the tool is to be used when I inst. the caps I push down on two of the star points together with one hand and "pop" the cap in place with my other hand. If you need further explanation on this you need to contact me at 650-967-3609 Leave a message if I'm not here and I'll get back to you a.s.a.p. I hope all this info. really helps. I've been doing these simple mods for over 4 years now and they really work. There's nothing wrong with the caps they just need a slight 'mod. to make them word for everyone. Hope this all helps, Obi-Wan |
RED5 POA Site Supporter Prowler Junkie From:USA |
posted 10-22-2005 09:45 AM
I would use which ever one is closer to you. I just wanted to bring this info back to the top for all the newer members. Bryden Motors & Jeff Hunter A Big THANK YOU to both of them for helping us out!! |
carbuff Prowler Junkie From: |
posted 10-22-2005 09:57 PM
Removed. This message has been edited by carbuff on 06-09-2006 at 12:37 AM |
All times are CT (US) Top of Page Previous Page | Return to General Prowler Discussion next newest topic | next oldest topic |
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP