 Click here to return to the Prowler Online Board Main Page  Topic Closed
|
 ProwlerOnline, Plymouth/Chrysler Prowler Discussion Forum
 General Prowler Discussion
 Front license plate attachment
|
| Bottom of Page | next newest topic | next oldest topic |
| Author | Topic: Front license plate attachment |
tiny Prowler Enthusiast From:Fredericksburg, Virginia |
posted 10-14-2002 10:46 AM
    
How does the front license plate holder attach to the 2002 Prowler |
|
YellowFever unregistered Admin Use |
posted 10-14-2002 11:28 AM
quote: There are tiny pilot holes in the driver's side front bumper. They appear as three very small dents where you drill though to hold it on. If you don't want to mess up the bumper, there are a number of bolts on the bottom, just fabricate something to hold a plate utilising those. ------------------ Driving a car is just transportation, |
TriJim        POA Site Supporter Prowler Junkie From:Chambersburg, PA |
posted 10-14-2002 04:05 PM
tiny, I bought our Prowler here in Texas and they already had the front plate holder installed (with screws into the front of the right bumper). I tried to remove since I have a PA tag and don't need a front plate, but empty holes look worse then plate holder. If you don't have holes in the front of the bumper, I'd investigate the "under the bumper" holders. They don't "damage" the bumper and look more refined (IMO). Good luck. Jim B. |
Bob Goetz  POA Site Supporter Mr. Real Rod From:Belle Plaine MN USA |
posted 10-14-2002 04:14 PM
Tiny, Bob from Real ROd here I have a plastic bracet that goes on the bottom of the bumper for $50 call me at 952-873-6626 if you want one. |
TLRandall           POA Site Supporter Prowler Junkie From:CALDWELL, TX, US |
posted 10-14-2002 04:53 PM
Same here Jim, mine already had the holes drilled. Better off to leave it on now. But to Tiny - if the holes are not there - don't drill! You'll regret it later! Use the screws underneath - I think on an earlier post someone had offered a prefab bracket. ------------------ |
|
TLRandall POA Site Supporter Prowler Junkie From:CALDWELL, TX, US |
posted 10-14-2002 04:58 PM
Woops! Sorry I forgot it was your bracket Bob! ------------------ |
WFP POA Site Supporter Prowler Junkie From:Longwood, Florida, USA |
posted 10-14-2002 07:02 PM
Here's a great alternative that doesn't require any drilling and keeps the esthetic symmetry of the front end of the car in tact.  Here's a link to the Carnuts.com site where you can purchase the bracket kit for $99.00, sounds like a great price to me! http://www.carnuts.com/PROWLER/prowler_product_line.htm Let me know what you think.... Good Luck! Bill ------------------ |
|
lavka POA Site Supporter Prowler Junkie From:Marble Falls, Texas |
posted 10-14-2002 07:20 PM
no bumpers no license plate no tickets no problem  ------------------ This message has been edited by lavka on 10-14-2002 at 07:20 PM |
|
Paul POA Site Supporter Prowler Junkie From:Cedarburg, WI USA |
posted 10-15-2002 11:45 PM
Hey, Tiny, if you need a license plate bracket, do a search for the Prowler PlateMount on the site for more information or send me an email. I'll send you the details on the PlateMount system I sell for Prowlers. |
nukedlines Prowler Newbie From:Pasadena TX |
posted 10-16-2002 08:37 PM
What is a PA plate and why don't you have to run a front plate if you have one? I got a ticket for no front plate the other day, and I refuse to put a front plate on the car! So if there is some way around it ie PA plate I wanna know about it! |
|
TriJim POA Site Supporter Prowler Junkie From:Chambersburg, PA |
posted 10-16-2002 09:11 PM
nuked -- sorry for the confusion. I'm in the military and chose to register our vehicles in my home-of-record state -- Pennsylvania (PA). PA uses only rear tags and this way I don't have to re-register our cars each time we move (plus I paid 6% sales tax rather than 8+% TX tax). Jim B. |
|
Todd Cameron unregistered Admin Use |
posted 10-17-2002 03:25 AM
why not get a Tom Mills front light kit and not have to worry about the bumpers?  ------------------ |
KAT 2K POA Site Supporter Prowler Junkie From:Memphis, IN |
posted 10-17-2002 09:28 AM
I used the realrod bracket. cut it, added some hinges, brackets and a electric actuator. Now I can have it down when I need it or up when I don't. Down
|
Kala POA Site Supporter Prowler Junkie From:Ojai, Ca /USA |
posted 10-21-2002 12:32 AM
I asked a friend who is a cop in Ventura Ca. I was told that if you dont have a bracket or holes for the plate, you don't have to have a front plate... I didnt put a front plate on our 02 PT either. No tickets so far |
All times are CT (US) Top of Page Previous Page | Return to General Prowler Discussion next newest topic | next oldest topic |
  |
|
Contact Us | Prowler Online Homepage
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP
