Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Prowler-Parts.Com | Prowler Products By Gary | Tom Mills / Jefferson Auto | Prowler-Products Trunks |
Bottom of Page | next newest topic | next oldest topic |
Author | Topic: Roll bar pictures |
galaxie POA Site Supporter Prowler Junkie From:middleburg hts. Oh. U.S.A. |
posted 12-22-2007 11:07 PM
This is the roll bar that we just completed. What do you think? The material is 2" stainless tube, which will be polished when finished. The pattern for the lexan is at the vendor. The roll bar will be offered with or without the lexan. We don't have a price yet with the lexan. The roll bar as shown, with a 3/16" base & ajustable pins for tention, will be $325.00 + actual S&H. If we get 20 orders, I'll sell the roll bar for $300.00 + actual S&H......Mac My partner (6FT.) sat in the car & could see thru the rear view mirror. He could just see the bottom edge of the roll bar. Any lower we're afraid the bar would be in the way,obstructing the rear view.
|
Snickers Prowler Junkie From:Avon, OH, USA |
posted 12-23-2007 01:37 AM
Mac I think the Roll Bar looks COOL. And, the price seems reasonable too. Will the Roll Bar store in the not so roomy trunk with the top up? Just thinking it will have to be removed in case of rain, etc. Thanks for coming up with new parts for us Prowler owners. |
GOATFALLS POA Site Supporter Prowler Junkie From:OK. 74070 |
posted 12-23-2007 09:52 AM
Very nice.. |
TaxKat POA Site Supporter Prowler Junkie From:Huntington Beach CA |
posted 12-23-2007 12:10 PM
Looks very nice Can you give us a measurement from the top of the deck lid to the bottom of the roll bar Height in inches That would give me something to visualize |
jerseyjoe Prowler Enthusiast From:Lebanon, NJ 08833 |
posted 12-23-2007 03:37 PM
Looks good. Good price. But...,I do like the profile of the Green Prowler's roll bar just a bit better. A little lower and less in your face. Just my opinion. Great job! JerseyJoe |
leav61 POA Site Supporter Prowler Oldie From:lansing, kansas |
posted 12-23-2007 04:26 PM
Been waiting for a negitive. Didn't want to be the first. I feel the height is to great for the width. jmo |
DRIVER POA Site Supporter Prowler Junkie From:BELLEVILLE , NJ |
posted 12-24-2007 11:52 AM
for what it is worth, I think the bar is a little too high. Perhaps even with the passenger head rest bar would be moor estheticly pleasing.Keep up the good work |
galaxie POA Site Supporter Prowler Junkie From:middleburg hts. Oh. U.S.A. |
posted 12-24-2007 01:25 PM
Thanks for the comments. The bottom of the bar to the deck lid is 6". The reason we made it 6" from the deck lid is because you won't see it when you are looking in the rear view mirror (just the bottom edge) We can make it lower if that's what you want. Does an 1" or 2" lower sound good to you. Also for those of you that want the lexan we want enough material to engrave the Prowler logo or whatever you want on it. I guess 4" would be O.K. if you want it that height. Please let me know how many would like it lower. We'll make it any height you want.......Thanks, Mac |
galaxie POA Site Supporter Prowler Junkie From:middleburg hts. Oh. U.S.A. |
posted 12-24-2007 01:27 PM
Oh, to answer Snickers question, yes the roll bar will fit in the trunk. |
galaxie POA Site Supporter Prowler Junkie From:middleburg hts. Oh. U.S.A. |
posted 12-24-2007 05:39 PM
Talked to my partner today about some of your comments concerning a lower roll bar. After Christmas we will bend a roll bar that will measure 4" from bottom of the bar to the deck lid. Will offer both heights. Will post pictures after Christmas. Have a safe & happy holiday.....Mac |
thedqman POA Site Supporter Prowler Junkie From:Marco Island Fl |
posted 12-25-2007 07:47 AM
Mac Thanks for taking the time to think of the prowler group in your projects. Mike |
TaxKat POA Site Supporter Prowler Junkie From:Huntington Beach CA |
posted 12-25-2007 10:50 AM
Thanks for your good work and a Merry Christmas to you and your family Looking forward to the new pics of lower roll bar |
jerseyjoe Prowler Enthusiast From:Lebanon, NJ 08833 |
posted 12-25-2007 06:50 PM
Galaxie, Thanks for taking our comments in a positive way. I am in for one with the lower height. Please post a picture of the newer height bar once you get the new one finished. It's great to have people like you involved in the sport. Merry Christmas to all.. JerseyJoe |
All times are CT (US) Top of Page Previous Page | Return to Prowler Performance/Appearance Discussion next newest topic | next oldest topic |
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP