| Prowler-Parts.Com | Prowler Products By Gary | Tom Mills / Jefferson Auto | Prowler-Products Trunks |
 |
 |
 |
 |
| Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
| Prowler-Parts.Com | Prowler Products By Gary | Tom Mills / Jefferson Auto | Prowler-Products Trunks |
|
|
|
|
 Click here to return to the Prowler Online Board Main Page |
 ProwlerOnline, Plymouth/Chrysler Prowler Discussion Forum
 Prowler Performance/Appearance Discussion
 PICTURES ARE HERE-KNOCK OFF SPINNERS (Page 1)
|
| Bottom of Page This topic is 2 pages long: 1 2 |
next newest topic | next oldest topic |
| Author | Topic: PICTURES ARE HERE-KNOCK OFF SPINNERS |
steelercat Prowler Junkie From:Osage Beach, MO. USA |
posted 01-28-2004 09:55 PM
    
Here are a few pictures. They don't do the overall look justice because of the dark shop and the spinners are not polished. I will show 3 different angles and then the separate components. Remember the rears are 3/4 of an inch longer than the fronts, also there is a left and a right for each spinner so they are 4 different pieces. To get this price I need to have 10 sets ordered. Prices are as follows. $600 for each set including chrome lug nuts and shipped to you. Polishing is an additional $20, also if you want the groves milled in each blade it will be an extra $25 per set. I hope you like the pictures and any feedback would be appreciated.  |
|
steelercat Prowler Junkie From:Osage Beach, MO. USA |
posted 01-28-2004 09:58 PM
Straight on veiw, kind of dark but I will get better pictures soon.
|
|
steelercat Prowler Junkie From:Osage Beach, MO. USA |
posted 01-28-2004 10:00 PM
different angle
|
|
steelercat Prowler Junkie From:Osage Beach, MO. USA |
posted 01-28-2004 10:04 PM
Here is a picture of the front and rear pieces and the spinner. The spinner reverse threads onto the cap and sealed with an o ring.
|
MZBHVNN     POA Site Supporter Prowler Junkie From:Haines City, FL US |
posted 01-29-2004 07:53 AM
Looks great, I would be interested in the polished ones if they polhish out to look like the chrome wheel ------------------ This message has been edited by MZBHVNN on 04-05-2004 at 08:24 AM |
BeWare                POA Site Supporter Prowler Junkie From:Acworth , Georgia , USA |
posted 01-29-2004 09:14 AM
Nice design and looks like allot of effort went into to them . The up close pictures are needed, but if I may suggest you may want to take a full view picture of the Prowler to get and idea of the total effect. Like you would do when you step back to see how something you've changed or added effects the overall look. Just a tought |
|
steelercat Prowler Junkie From:Osage Beach, MO. USA |
posted 01-29-2004 10:22 AM
Right now we have a lot of snow and ice and I can't get the car out to get the full picture, but I will get them as soon as this weather clears up. |
|
Gary C POA Site Supporter Prowler Junkie Personal ScrapBook From:San Diego Area |
posted 01-29-2004 11:52 PM
 ------------------ contact Bill Pemberton at Woodhouse |
|
steelercat Prowler Junkie From:Osage Beach, MO. USA |
posted 01-30-2004 05:22 PM
Here are the new pictures of the spinners polished and on the car. This is the best improvement I have ever made on a car. All my time finally paid off. Now I can ebay those stupid plastic stock caps. Let me know what you think.     |
GenoTex POA Site Supporter Prowler Junkie Personal ScrapBook From:Oakfield, WI, USA |
posted 01-30-2004 05:25 PM
Nice ! What's the white stuff? Oh yeah... it's outside! |
|
steelercat Prowler Junkie From:Osage Beach, MO. USA |
posted 01-30-2004 06:45 PM
The little center cap can also be made flat so you can use a shimmer. |
|
Dead End Don Prowler Junkie From:Palos Verdes, California USA |
posted 01-30-2004 06:52 PM
I like the look, but I'm curious to see what you think of them in a few thousand miles. I had a set of these years ago on a 72 240Z with Shelby aluminum aftermarket wheels. They looked great, but the little set screw that holds them in the wheel just didn't do the job. They worked loose every couple days, and then they rattle around. Tried loctite, the whole deal, and finally took them off. Maybe these are "new and improved" - I can't tell from the photo, but they take a lot of bumps and vibration, and the point on the screw where it contacts the softer aluminum just didn't do the job. Let us know how they stand up, because they do look sharp!! |
|
steelercat Prowler Junkie From:Osage Beach, MO. USA |
posted 01-31-2004 11:13 AM
These mount up alot different than that. These spinners are very strong. |
|
Tom Santella Prowler Junkie From:Sandy Hook Ct. USA |
posted 01-31-2004 06:46 PM
Polished up really does look nice.A flat center cap with a shimmer might be just right. Maybe some kind of shimmer for the flat spots on the spinner. If you get a pic from the back, showing how they stick out, please post, would be real helpfull. Nice job!!! ------------------ |
|
steelercat Prowler Junkie From:Osage Beach, MO. USA |
posted 02-07-2004 05:49 PM
The second batch will be done in around 10 days. On this run the center caps will be flat so a shimmer can be used, also the front spinner has been cut down a little smaller than the rear. A fully polished set complete with chromed lugnuts will run $590 shipped. Thanks for all the great PM's. |
|
Tom Santella Prowler Junkie From:Sandy Hook Ct. USA |
posted 02-08-2004 11:21 AM
This may have to go on the short list. Please ,any pics of the latest version and possibly from the back. Thanks! ------------------ |
|
steelercat Prowler Junkie From:Osage Beach, MO. USA |
posted 02-08-2004 11:55 AM
I won't have pictures of the new ones for a while. They will look almost the same except you will be able to use a shimmer in the center and the spinner blades will be smooth without the grooves. What kind of rear shot are you wanting? I can go to my shop and get another picture. Let me know if you want a set because I can get it speeded up if I need to. |
|
steelercat Prowler Junkie From:Osage Beach, MO. USA |
posted 02-08-2004 12:14 PM
Here are some pictures of some rear angled shots. The third picture is without the spinner blade attached.    |
jd2ksilver POA Site Supporter Prowler Junkie Personal ScrapBook From:Mt. View, CA |
posted 02-08-2004 05:22 PM
That's got a nice look even without the spinner attached. ------------------
|
|
steelercat Prowler Junkie From:Osage Beach, MO. USA |
posted 04-03-2004 08:44 AM
I still have 3 sets of these left from the last run if anyone is interested. I have put around 900 miles on mine and they are awesome. ------------------ |
|
thedqman POA Site Supporter Prowler Junkie From:Marco Island Fl |
posted 04-03-2004 01:54 PM
These caps look great! I would be interested in a set, but which caps ae they? Are they the round or flat centers? Are they polished? Thank you for all your time designing these! MIke 239 393 0969 |
|
steelercat Prowler Junkie From:Osage Beach, MO. USA |
posted 04-03-2004 03:32 PM
They are made up but I can have either center cap installed. You can get them either polished or not. Price is $590 polished or $530 natural. Both prices include shipping in the US. ------------------ |
|
steelercat Prowler Junkie From:Osage Beach, MO. USA |
posted 05-18-2004 06:31 AM
I have been getting alot of questions about these so I wanted to bring this back to the top. ------------------ |
|
Tom Santella Prowler Junkie From:Sandy Hook Ct. USA |
posted 05-19-2004 06:42 AM
I still want them. Just waiting for the right timing. ------------------ |
|
steelercat Prowler Junkie From:Osage Beach, MO. USA |
posted 05-19-2004 05:20 PM
I am close to trading the car in and if I do I would be willing to trade your stock center caps and $375 for the spinners off my car. ------------------ |
This topic is 2 pages long: 1 2 All times are CT (US) Top of Page Previous Page | Return to Prowler Performance/Appearance Discussion next newest topic | next oldest topic |
  |
|
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP
