Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Prowler-Parts.Com | Prowler Products By Gary | Tom Mills / Jefferson Auto | Prowler-Products Trunks |
Bottom of Page | next newest topic | next oldest topic |
Author | Topic: Update TPMS and tire sensor |
WildCat POA Site Supporter Prowler Junkie Personal ScrapBook From:North Louisville, Indiana, USA |
posted 08-20-2014 10:49 AM
I have put different wheels and tires on my car and updated the TPMS New in dash module part number 04815227AG Must have all new wheel sensors 52088990AE The dealer I went to had 3 different style tools to program the system It would have been helpful to have the ID # off each wheel sensor and the location it would be placed at. They had to use a magnet to get mine programmed After an hour they got it programmed and the light is out. Was able to change the in dash module by removing the dash top unplug module and remove 2 screws 1/4" hex head or Phillips screwdriver will work. But it is a challenge, especially with just one hand, so Sue helped. Reverse procedure to install new module. Good luck ------------------ |
garysss POA Site Supporter Prowler Junkie From:Balto. Md. |
posted 08-20-2014 11:02 AM
They always have to use a magnet, where each sensor was or the id number shouldn't have mattered. |
WildCat POA Site Supporter Prowler Junkie Personal ScrapBook From:North Louisville, Indiana, USA |
posted 08-20-2014 01:33 PM
quote:
The part numbers I posted are replacement for Chrysler vehicles from 1997 to 2013 |
garysss POA Site Supporter Prowler Junkie From:Balto. Md. |
posted 08-20-2014 03:01 PM
They most likely meant the newer systems starting in 2007. You used the one fron 2002 I think. Glad you got it done. |
All times are CT (US) Top of Page Previous Page | Return to Tires, Rims Discusssion next newest topic | next oldest topic |
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP