posted 12-03-2003 09:42 PM                  

Note: Verify the door is properly adjusted to the body prior to adjusting the door glass,

Note: Convertble top must be up and latched securely

Fore-Aft Adjustment

1)Lower glass to mid position in order to access the glass attch bolts.

2)Loosen the rear glass attaching bolts

3)Ajust glass fore-aft by sliding glass assembly forware and backward

Note: Glass attach bolts will move in slots of rear window regulator plate,

Up-Down Tilt of Glass

1) Loosen rear guide rail upper attaching nut and lower jack screw attaching nut.

2) Remove top seals

3) Tighten rear guide rail upper attach nut

4) Align top edge of the glass to top seal

5) Tighten both jack srew nuts

6) Replace top seals

Cross-Car Adjustment

1) Loosen front and rear lower jack screw nut

2) Adjust jack screw with 3mm allen wrench to move upper edege of glass inboard or outboard as neede.

Note: counter clockwise for inboard adjust abd clockwise for outboard adjust.

3) Tighten lower guide rail jack screw nuts

Full-Up Position Adjustment

1) Loosen up stop fastner

2)Remove convertble top weatherstrip

3) Adjust window to specifications in Door Glass adjustment Sequence Chart

4} Tighten up stop fastener

5) Replace convertible top weather seals