Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Prowler Products By Gary | Tom Mills / Jefferson Auto |
![]() |
![]() |
Bottom of Page | next newest topic | next oldest topic |
Author | Topic: RPM question |
Spyder![]() Prowler Junkie From:San Diego, CA, USA |
![]() ![]() ![]() ![]() ![]() ![]() what is the typical RPM range under the following conditions? 1. engine on, gear in park. 2. engine on, gear in neutral, break applied. 3. engine on, gear in drive or auto-stick, break applied. the reason I ask is that when I first got my prowler back in July, under the above conditions, the tac would read around 1000rpm. under these conditions now, the tac reads about 800rpm to 850rpm. is this normal for break in? ------------------ |
Marty Usher![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie From:San Antonio, Texas, United States |
![]() ![]() ![]() ![]() ![]() ![]() Spyder - my tach reads just a hair under 1000 in all conditions. No appeciable change whether in park, neutral or gear. My car has 19,000 + miles so it is WAY past break-in period. Hopefully someone else will respond also because I do not have factory tach so I am not absolutely sure the new one is calibrated to factory specs. (but it sure looks better!) Marty ------------------ ![]() Driving my Dream |
Spyder![]() Prowler Junkie From:San Diego, CA, USA |
![]() ![]() ![]() ![]() ![]() ![]() anyone else willing to contribute some info? ------------------ |
Gary C![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() POA Site Supporter Prowler Junkie Personal ScrapBook From:San Diego Area |
![]() ![]() ![]() ![]() ![]() ![]() I would worry yourself, seems to me this would be normal, the computer goes through a learning stage, your Kat is Smarter now. Enjoy |
WPG Prowler Junkie From:Orlando, Florida |
![]() ![]() ![]() ![]() ![]() ![]() I checked mine last night and my Prowler idles around 750-800 RPM. 800 RPM sounds normal to me. ------------------ • MTD Prowler Intake System 2.1 With EGR Bypass Kit Future Mods: |
Spyder![]() Prowler Junkie From:San Diego, CA, USA |
![]() ![]() ![]() ![]() ![]() ![]() Thanks VERY much ![]() ------------------ |
ALLEY CAT![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() POA Lifetime Site Supporter Prowler Junkie From:mesa, az, USA |
![]() ![]() ![]() ![]() ![]() ![]() Spyder - It could be a problem with the tach. My tech was checking over the kat and found that it was 350 RPMs off what their test equipment showed. Ordered and replaced the original one under warranty. ------------------ |
All times are CT (US) Top of Page Previous Page | ![]() |
![]() ![]() |
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP