posted 07-26-2003 11:19 AM                  

Ok, I will give them a buzz and see what they say. I will also inhance the
"Made In The U.S.A." phrase.

REBELBOB,

Thank you..

SPCL-T,

I will adjust the images a little more.

akadvs1,

I will gather those details soon and post the prices.

Marty Usher,

I will play with your idea and see how it looks. I always try to stay with a smooth
look without too much wording all over the place.

Scotty,

Depending on the demand this would be a busy request. I would invision a set of personalized shirts and then some standard shirts for those that purchase one that are not part of the club.

cnote6,

As soon as I put he details together, your are put down.

Hey Rich(aka.. BeWare),

Thank you for the vote of confidence. I would like to wear some shirts with your designs

When will you tackle some??

All,

I will post purchase details once I have them. Thank you all for the vote of confidence.

posted 07-26-2003 12:32 PM                  

Thank you all for the vote of support.

posted 07-26-2003 02:40 PM                  

------------------

Current mods: Mopar dual exhaust & front mudflaps; MacMotorsports Air Intake;
Real Rod Air Patrol; Graphics by Balistek Designs; ($8) Chrome grille; Chrome
tire valve-stem covers; Painted rear bumper lettering; Prowler Pro Gears; Synthetic
Oil; Raybestos Ceramic Brake Pads; TGF Door Panel Inserts & Headrest Covers;
SheepskinExpress Sheepskin Seatcovers; Grille Light; Pinstriping by Bo Boring;
Painted Valve Cover; Window Tinting; Windshield Visor Banner; Front Bumper
Removal / Relocation of Front Turn Signal Lights; Real Rod Transmission Cooler
Cover, Sill and Carper Covers, Aero Front Covers and Roadster Rear Pan, rear
bumpers removed; rear mudflaps; painted calipers; Prowler Products by Gary
Drilled Rotors, front and rear; Painted tach; and Jay's Aluminum Billet Center Caps
w/shimmers, Chrome Lugnuts and Chrome Radio Bezel Shimmer.

More 'Pumpkin' photos . . . . . More cars and other stuff

posted 07-26-2003 04:14 PM                  

I like the t-shirt with POA logo on front, flag on back. Possibly with front pocket and smaller POA logo over pocket *just another idea*. I didn't even notice the "Made in the U.S.A." the first look, but was mainly looking at the cars. I like the subliminality of it, but it might look nice red and white also. Whatever is done, I'm in for at least one, and bet I could sell others to friends.
Just one thing, Dan... you forgot the last period after the "A"... (I'm a detailer... I notice little details like that. LOL) As an alternative for our neighbors to the north, you might consider smaller font under "Made in the U.S.A." to read: (and shipped to Canada for 1.5X price)
And, Fred, there's no need for formalities here... its idive, not IDIVE or Idive... LOL (j/k - I get those all the time, other sites too. I've been called alot worse.)

------------------
Mickey
1997 Plymouth Prowler #156
Custom car cover
Mopar front splash guards
Real Rod stainless steel transmission cooler cover
Mopar Trailer hitch and harness
Real Rod weekender
1992 Plymouth Grand Voyager SE
Longhorn scratches
Boomerschlobber

posted 07-26-2003 04:28 PM                  

quote:

---

Originally posted by ed monahan:
Dan, when you get into personalizing each individual shirt you are creating a whole lot more work and a nightmare trying to keep it all straight. It would be a whole lot easier to design one shirt and have everyone get that. It might not be quite as popular but it would be manageable. If they are silk screened you would need a separate screen for each shirt and that would get very expensive.

---

Ed, I agree whole heartedly that if they are silk screened it would be to expensive to personalize but it is not difficult using sublimation. We did 26 or 27 changes to the basic design for our show's 76 plaques.

posted 07-26-2003 04:32 PM                  

Super work Dan.

I like the flag/cat work on the backside only and POA symbol for the front,,,,,,,,,,,,,,>>>>>>>with a pocket>>YES

JMO

------------------

26,000 miles of smiles

Call 911 - there is a Prowler in my garage....

posted 07-26-2003 07:18 PM                  

Made in the USA on back, large.

How about the words "made in the USA" were above or below the design?

posted 07-27-2003 10:58 AM                  

quote:

---

Originally posted by ed monahan:
Scotty, I am not familiar with sublimation so I don't have a clue. Whatever Dan decides is fine with me, though.

---

Dan, It is a GREAT design and my help is available if it is needed. I suggested personalization because most of the Prowler owners have personalized their Cats and I thought that doing the same to the shirts would be a nice touch.

posted 07-27-2003 11:55 AM                  

Scotty,

I have emailed a called a two places but since it is the weekend I suppose I will get answers next week.

I will render a few shirts with the suggestions given.

Can't say it enough .... Thank you all for the vote of support!!

Thank you Rich (aka... BEWARE) for starting this thread.

posted 07-27-2003 08:33 PM                  

I think "squared" images like this one are better for the back of a T-shirt. Rounded or other image shapes are better for the front of a shirt.

Nice job, Dan!

posted 07-28-2003 01:40 PM                  

Just want to advise that I might have to remove the PROWLER font and replace it with something like "ROADSTER". This is due to licensing issues. I understand Phil Horvath and others have been working diligently to gather licensing permission for the Prowler font and cat logo.

Phil Horvath asked me to talk with him some more on this.

We shall see...

posted 07-28-2003 01:59 PM                  

If you do the shirts through POA, don't they have the license for the font? You could sell them as part of a fundraiser for the site?

I like the discussion so far about the shirts. I would like to see a small POA on the upper left chest area in the front. A large image in the front and back is a little much.

Just another little note, I didn't hear anyone else mention this... the electric blue and the mulholland tops need to be a little lighter... on my screen they looked black.

Great job Dan!

edited: I went back and looked at the image again. The mulholland does look blue but the electric is black. I thought the electric came with a blue top.

------------------
Cliff Watson See My Prowler Page
2K1 Mulholland, Colorshift Flames, Mud Flaps, TGF Side Panels, TGF Bumper Covers, Eric Wolf Chrome Tranny Cooler, Blueberry Shimmers, Front Ceramic Pads, Homemade Top Brace, SSS Muffler, Weekender.
2001 Dakota SLT+ CC (Patriot Blue)
1998 Durango SLT+ (Intense Blue)
X - 1998 Honda Accord
X - 1991 Dodge Spirit
X - 1965 Ford Mustang (289)
X - 1994 Dodge Daytona Turbo
X - 1971 Ford Pinto (The Rust Bucket)

posted 07-28-2003 03:09 PM                  

I think your monitor is getting old. It looks blue on my screen.

Thank you for the heads up!!