Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Click here to return to the Prowler Online Board Main Page |
ProwlerOnline, Plymouth/Chrysler Prowler Discussion Forum
General Prowler Discussion Prowler floor mats with Ford logo?
|
Bottom of Page | next newest topic | next oldest topic |
Author | Topic: Prowler floor mats with Ford logo? |
Joe Ruggiero POA Site Supporter Prowler Junkie From:Mount Dora, FL USA |
posted 01-11-2003 09:53 PM
After my dealer said floor mats are no longer available, I complained to the service manager. He said that if he couldn't find any, I could order a set from the company that makes them from Chrysler for about $90.00. He said they would be identical with Prowler logo - but without Chrysler logo - until Chrysler releases the rights for this. Fortunately, he was able to find a set of silver logo floor mats for me. My kat is deep candy red, I told him either red or silver would do. As I examined the box I saw a Ford Blue oval logo thru the sealing tape. I then flipped over the floor mat and saw another Ford Blue oval logo right on the underside of the mats. Also, the Prowler stiched logo was sewn right thru the rubber bottom of the mat, unlike my factory ones. Has anyone else seen this? The part number is 82208101 |
Gary C POA Site Supporter Prowler Junkie Personal ScrapBook From:San Diego Area |
posted 01-11-2003 10:19 PM
Here is our Parts index click on the link then scroll down and check out the part numbers for your mats, hope this helps Click here please ------------------ Prowler Products by GaryE, formally Carlini |
Joe Ruggiero POA Site Supporter Prowler Junkie From:Mount Dora, FL USA |
posted 01-11-2003 10:38 PM
Gary, I had given both part numbers listed for silver & red logo to the service manager. He said neither were available. I don't know how he came up with the part number I actually received. Joe |
CJ POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Rochester Hills, MI USA |
posted 01-12-2003 12:26 AM
My contact at Mopar has assured me that they are going to continue ordering the Prowler floor mats (but only in the Silver logo). I will speak with him again on Monday regarding this issue. I'll find out what they show in the Parts Depots and let him know that the dealers are not finding these mats in the system. |
whealy POA Site Supporter Prowler Junkie Personal ScrapBook From:Carmel, IN USA |
posted 01-12-2003 08:11 AM
Joe & Linda, Do you know about the No Cal Viper Club prowler mats ? They aren't stock, but it is another option. ------------------ |
Duane Curto Prowler Junkie From:Canyon Lake TX 78133 USA |
posted 01-12-2003 08:53 AM
Whealy, The mats listed in the viper club look pretty good to me. This looks like a great option since most colors are no longer available. |
whealy POA Site Supporter Prowler Junkie Personal ScrapBook From:Carmel, IN USA |
posted 01-12-2003 10:35 AM
Duane, I'm sure these work for some. I know they did for me. But if your looking for stock, these aren't the answer. To be honest the Mulholland doesn't color match. Unless of course you are thinking about changing the interior color to match the mats. Illistration via Dan Pena You can see the color differences here with the Mulholland (in the gaugue cluster) and the floormat blue. This message has been edited by whealy on 01-12-2003 at 10:42 AM |
Joe Ruggiero POA Site Supporter Prowler Junkie From:Mount Dora, FL USA |
posted 01-12-2003 10:41 AM
Does anyone have any thoughts on the Ford blue oval logo?? I thought I was going crazy when I first saw it. |
whealy POA Site Supporter Prowler Junkie Personal ScrapBook From:Carmel, IN USA |
posted 01-12-2003 10:43 AM
Joe, you talking on Prowler mat? You trying to get kicked out? |
Joe Ruggiero POA Site Supporter Prowler Junkie From:Mount Dora, FL USA |
posted 01-12-2003 11:55 AM
Whealy, I know your going to think I've been snifing my exhaust to much, but here are some pictures. Look close to the left of white Mopar label on the box, you will see the Ford logo. On the floor mat pic, look at the very left of the printing, you will see the Ford logo there to. Also, there is no Chrysler logo anywhere on the mats, unlike my factory ones. There is what appears to be a date code of 10/02 on the new mats. Joe |
YellowFever unregistered Admin Use |
posted 01-12-2003 01:36 PM
quote: Am I missing something here? I see the Chrysler 5-star symbol and the word "Mopar" but, no blue Ford oval. I can't decipher what is on the bottom of the floor mat but, suffice it to say, I'm sure Chrysler is not pushing Ford parts. |
Punk N Purp POA Site Supporter Prowler Junkie From:Pacifica, CA, USA |
posted 01-12-2003 03:08 PM
Focus, FOCUS!!! Then I'll decide. I know I am going blind, but not that blind. |
matthew46 POA Site Supporter Prowler Junkie From:Keyport, NJ, USA |
posted 01-12-2003 03:11 PM
I saw it just needed some . ------------------ |
whealy POA Site Supporter Prowler Junkie Personal ScrapBook From:Carmel, IN USA |
posted 01-12-2003 03:22 PM
Joe, With Mattew's help I saw the one on the box. Don't see the one on the mat. Doesn't matter though. Good find. i guess there's only one parts distributer for all the big three? |
Joe Ruggiero POA Site Supporter Prowler Junkie From:Mount Dora, FL USA |
posted 01-12-2003 03:23 PM
I have edited the pics with arrows to show the logo's. I will try to get clearer photos to post, later. I swear my wife and I can read the Ford logos. |
WildBill POA Site Supporter Prowler Junkie From:United States of America, USA |
posted 01-12-2003 04:43 PM
Looks like they just took plain Ford mats & had them embroidered with the Prowler text logo & then resealed the box with a Mopar sticker on top... Stitching should not come through mat like that... If you aren't happy with them, then I would tell the dealership to order the real ones... Who would want anything Fords in the Kat anyway??? That is just bad luck WildBill |
Joe Ruggiero POA Site Supporter Prowler Junkie From:Mount Dora, FL USA |
posted 01-12-2003 04:57 PM
Matthew, Thanks for the great enhancement. It really helped. Joe |
dpena POA Site Supporter Administrating Kat Visit Dan's Prowler Excitement Personal ScrapBook From:San Jose Ca Santa Clara |
posted 01-12-2003 08:56 PM
Just incase you did not know.... The prowler is a combination of parts from different vehicles. This find does not surprise me. Later... ------------------ |
TLRandall POA Site Supporter Prowler Junkie From:CALDWELL, TX, US |
posted 01-13-2003 02:27 PM
That is a wild find! Do you think that the parts supplier for the Prowler floormats also supplies Ford with the same cut? Or did someone find that there was a similar sized floormat in the Ford version and did an old fashion switch-a-roo! Hey, that may solve some of our future parts dilemmas! ------------------ |
pumpkin POA Site Supporter Prowler Junkie Visit Waleke's World Personal ScrapBook From:Las Cruces, NM, USA |
posted 01-13-2003 03:54 PM
quote: $120 set ,ouch ------------------ New pictures in Personal Scrapbook (9/26/02) |
Joe Ruggiero POA Site Supporter Prowler Junkie From:Mount Dora, FL USA |
posted 01-13-2003 06:57 PM
TLRandall, They are actually cut exactly to fit the Prowler floor. The drivers side has the grommet hole to hold it in place. Joe |
All times are CT (US) Top of Page Previous Page | Return to General Prowler Discussion next newest topic | next oldest topic |
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP