Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Prowler-Parts.Com | Prowler Products By Gary | Tom Mills / Jefferson Auto | Prowler-Products Trunks |
Bottom of Page This topic is 4 pages long: 1 2 3 4 |
next newest topic | next oldest topic |
Author | Topic: Viper Side Panels Ready |
GaryE POA Site Supporter and Vendor Prowler JunkieProwler Products by Gary From:Laguna Woods, CA, USA |
posted 12-07-2013 05:23 PM
I just picked up the first set of Viper Side Panels Phil and I had made. I am very excited with the product. They are black jell coated hand laid fiberglass. They are made by same shop that makes my other high quality fiberglass products. The panel is mounted on my Midnight Blue Prowler. They fit great. Contact Phil or me if you are not already on the list to get a set. They are $850 plus shipping. [img] ------------------ |
kenjo Prowler Enthusiast From:Greentown |
posted 12-07-2013 05:42 PM
Hello guys, the panels look fantastic. I can't wait to get a set. Is it possible to get a picture of the inside of them. Thank you |
GaryE POA Site Supporter and Vendor Prowler JunkieProwler Products by Gary From:Laguna Woods, CA, USA |
posted 12-07-2013 05:58 PM
Hear you go. The front will have a lot more shine to it on the future parts. ------------------ This message has been edited by GaryE on 12-07-2013 at 05:59 PM |
kenjo Prowler Enthusiast From:Greentown |
posted 12-07-2013 06:03 PM
Thank you |
KONEJ POA Site Supporter Prowler Junkie From:Terrebonne, Quebec, CANADA |
posted 12-08-2013 03:06 PM
They look great. Good job ance again. |
Bob Mears POA Site Supporter Prowler Junkie From:Lubbock, Texas, USA |
posted 12-09-2013 08:33 AM
Excellent! |
phil2237 POA Site Supporter Prowler Junkie From:PLACENTIA CALIFORNIA |
posted 12-09-2013 01:13 PM
We are now taking orders, those who have contacted me over the last several months will be contacted by this Wednesday. We will try to fill all orders as fast as possible. Each panel is fitted to the Prowler before shipping. This has been a long time coming and I am sure you will be completely satisfied with the quality that goes into each panel. The side marker will be left out, but for those that would like to put the marker light in. We will cut out the panel for you. You can contact Gary at Prowler Products or contact me at pmanzaksr@yahoo.com to get you order in. |
DublinOH POA Site Supporter Prowler Junkie From:McMurray, Pa, USA |
posted 12-09-2013 07:33 PM
Nice job guys. Looking forward to getting my panels. |
Hairarchitect Prowler Junkie From:Aurora Colorado usa |
posted 12-22-2013 08:32 PM
is this a complete panel ? do i have to keep the original panel? |
Hairarchitect Prowler Junkie From:Aurora Colorado usa |
posted 12-22-2013 08:35 PM
they look amazing |
phil2237 POA Site Supporter Prowler Junkie From:PLACENTIA CALIFORNIA |
posted 12-22-2013 10:45 PM
quote: Yes , You keep your original panels. You can even use the same box that we ship it in to store your factory panels. |
alustiza POA Site Supporter Prowler Junkie From:Tucson, AZ |
posted 12-28-2013 05:19 PM
I just received the new side panels from Gary and Phil last night and I tried them on today. They fit perfectly and look super good. For the people ordering these, make sure you try the panels on your Prowler prior to getting them painted. I say this as this last summer I ordered a set of slotted side panels from someone else and I took them straight from the Greyhound station, the way they were shipped, to the body shop without first trying them on the Prowler. This was the first time I had ever ordered after market body parts for a car, so I had no idea as to the possibility of not fitting. Well when I got the panels back from the body shop, they did not fit correctly. They would not align up with the doors correctly. I contacted the individual who sold them to me and he instructed me as to some corrections I could make to the panels, but nothing worked. I ended up sending those panels back, at my expense, and he refunded my money for the panels, and he indicated something was wrong with the panels. He tried to fix the problem, but he had no idea if they would fit correctly after the alteration, so I chose not to risk the shipping cost again if they did not fit. The entire thing ended up costing me $650 for the wasted paint cost and shipping both ways. This is why I say try before you paint. The attaching mechanism for the Gary and Phil's panels match those of the original Prowler panels which the other ones were of a different method. Thanks you two for building these panels. |
padroo POA Site Supporter Prowler Junkie From:Chesterton, IN, USA |
posted 12-28-2013 06:08 PM
That sounds like good advice on all custom made items, thanks. |
KrazyKat Prowler Junkie From:Corona Ca U.S. |
posted 12-28-2013 06:34 PM
HI I just picked up my new panels also, SUPER quality product. Well worth the wait. Gary & phil Number 1 quality. Thanks for giving the prowler family another great product.!!!! My hats off to you guys.!!! Tom |
phil2237 POA Site Supporter Prowler Junkie From:PLACENTIA CALIFORNIA |
posted 01-07-2014 07:21 PM
I have had several ask about installing these panels, These panels are simple Plug & Play, NO modifying at all. Simply remove the top 3 bolts, unplug lamp socket, Install new panels by just putting them into place & install the 3 screws, They are the exact same mounts as the factory panels. No Mickey Mouse holders or tabs. |
phil2237 POA Site Supporter Prowler Junkie From:PLACENTIA CALIFORNIA |
posted 01-18-2014 09:06 AM
For all those that have received their panels, please post pictures. |
phil2237 POA Site Supporter Prowler Junkie From:PLACENTIA CALIFORNIA |
posted 01-26-2014 08:00 PM
When installing your new panels, It is best to remove the L shaped plastic tubing on the air cleaner inlet. This will allow the inlet of the air cleaner to suck air right at the Viper Vent |
Gort Prowler Junkie From:Clinton Tn,USA |
posted 01-27-2014 04:35 PM
quote: I did that and it will let more air into the engine...but what about water? Not that I'm going to be in the rain. |
phil2237 POA Site Supporter Prowler Junkie From:PLACENTIA CALIFORNIA |
posted 01-27-2014 07:04 PM
The vents are aimed to the rear just as the tube was, You will get no water in the inlet. |
phil2237 POA Site Supporter Prowler Junkie From:PLACENTIA CALIFORNIA |
posted 02-18-2014 09:38 PM
We are now catching up on orders, If anyone would like a set of panels, let us know. |
CCJ POA Site Supporter Prowler Junkie From:Little Rock, AR, USA |
posted 03-23-2014 09:43 PM
quote: Anymore photos? |
phil2237 POA Site Supporter Prowler Junkie From:PLACENTIA CALIFORNIA |
posted 03-23-2014 09:54 PM
We have a set in stock ready to ship This message has been edited by phil2237 on 03-23-2014 at 09:59 PM |
kenjo Prowler Enthusiast From:Greentown |
posted 03-29-2014 12:17 PM
Is the set ready for shipping still available? If so, I am interested in them. |
GaryE POA Site Supporter and Vendor Prowler JunkieProwler Products by Gary From:Laguna Woods, CA, USA |
posted 03-29-2014 04:19 PM
Sent you a PM |
DublinOH POA Site Supporter Prowler Junkie From:McMurray, Pa, USA |
posted 03-30-2014 08:07 PM
Still have the flame details to work out. Another great product from Gary & Phil. No issues with the installation. I decided to eliminate the side marker lights. I did have to remove the snorkel and foam pad from the passenger side. |
This topic is 4 pages long: 1 2 3 4 All times are CT (US) Top of Page Previous Page | Return to Prowler Performance/Appearance Discussion next newest topic | next oldest topic |
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP