Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Prowler Products By Gary | Tom Mills / Jefferson Auto |
Bottom of Page | next newest topic | next oldest topic |
Author | Topic: Heater Hose - Need Help! |
quincy POA Site Supporter Prowler Junkie From:Fairfield Glade, TN. USA |
posted 04-18-2017 11:35 AM
My 99 Prowler is currently in the shop tying up a bay.....one of the aftermarket heater core hoses from the Australian company that RPL got the hoses from is not correct. The OEM heater core hose is 5/8" on one end and 3/4" on the other. The aftermarket Australian heater core hose is 3/4" on both ends, so it will not connect correctly....to loose! These hoses are not available at the Chrysler dealership. If you have a spare (or know of a work around plan) I sure would appreciate the chance to purchase it! Oh, the heater core hose in question is not shown in the online parts manual. It is, and I quote, "A Non Illustrated Part". Thanks, This message has been edited by quincy on 04-18-2017 at 12:18 PM |
NiteProwl64 Prowler Enthusiast From:Florida |
posted 04-18-2017 12:30 PM
Both heater core hoses should be available at the Dealership. The return line is 4592105, supply line is 4815542. Both show as available according to Chrysler... |
RDinTN POA Site Supporter Prowler Junkie From:Beautiful East Tennessee |
posted 04-18-2017 01:32 PM
Rock Auto; any help? http://www.rockauto.com/en/catalog/plymouth,1999,prowl er,3.5l+v6,1357017,heat+&+air+conditioning,heater+hose+/+pipe,6892 It might prove too restrictive, but has your mechanic talked to you about a 3/4" to 5/8" adaptor? This message has been edited by RDinTN on 04-18-2017 at 04:19 PM |
quincy POA Site Supporter Prowler Junkie From:Fairfield Glade, TN. USA |
posted 04-18-2017 05:35 PM
Thanks for the feed back guys. I did get a few part numbers; but no illustration. Went to the Chrysler parts counter in town this afternoon. Ordered two heater hoses via Oklahoma. Parts should be in by Friday at the latest. Yes, the mechanic concurs that a 3/4 to 5/8 nipple would be the 'Last Resort' attempt to create a custom heater hose. And, yes, I believe that would work just fine. We will see what comes in from the parts depot in Oklahoma. In the meantime, if you have in your possession heater hoses from RPL made in Australia, please check both ends of the ~ one foot long 'S' shaped hose to make sure it has a 5/8" end and a 3/4" end. Issue could be a fluke, and I got the only one..... |
kriegsadmiral POA Site Supporter Prowler Junkie From:Illinois |
posted 04-19-2017 06:47 AM
I had my heater hoses installed two months ago and they didn't tell me about that issue. They just said they needed to do a little bending on a couple to get a better fit. You would think that the hole would be consistent throughout the length of the hose. I wonder if my guy just used the adapter and didn't tell me. This message has been edited by kriegsadmiral on 04-19-2017 at 06:49 AM |
George Johnson POA Site Supporter Prowler Junkie From:Katy, TX USA |
posted 04-22-2017 09:44 AM
RPL was selling heater hose sets. |
phil2237 POA Site Supporter Prowler Junkie From:PLACENTIA CALIFORNIA |
posted 04-22-2017 10:52 AM
quote: George, That's where he bought his set, I need to check mine to see if the correct one is in the bag |
Richnew41 POA Site Supporter Prowler Junkie From:Wind Gap, PA |
posted 04-22-2017 01:32 PM
Don't know if this helps but just replaced mine last week on om 02'... OEM ordered from Moparoverstocked.com Fit perfectly with no issues for upper and lower. about $125.00 for both with shipping Hope that helps |
garysss POA Site Supporter Prowler Junkie From:Balto. Md. |
posted 04-22-2017 02:52 PM
They are talking about heater hoses, not radiator hoses. |
Richnew41 POA Site Supporter Prowler Junkie From:Wind Gap, PA |
posted 04-22-2017 06:08 PM
My bad sorry... |
Steve Conley POA Site Supporter Prowler Junkie From:Tucson,AZ,U.S.A. |
posted 04-22-2017 09:02 PM
When I installed the timing belt on the Kat, I also installed the radiator hoses and heater hoses that I purchased from RPL. I was short the lower "S" shaped heater hose. I went down to Oreilly, showed the counter guy the hose. He came back with a hose that was about a inch short. But the right "S" shape and size and it just streached out about a inch. It seems to be working. But I never got the part number? Steve |
All times are CT (US) Top of Page Previous Page | Return to Technical Questions & Answers next newest topic | next oldest topic |
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP