Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Bottom of Page | next newest topic | next oldest topic |
Author | Topic: Prowler Concept Wheel? |
SuperDave POA Site Supporter Prowler Junkie From:Murphy, Texas |
posted 12-17-2006 11:51 PM
I recently picked up a 17" Prowler wheel (first image below) that appears to be off one of the original concept cars (second image below). Does anyone have information on this wheel? I've never seen another and would love to have some information about it. Thanks in advance! Dave |
Larry Lord Prowler Junkie Personal ScrapBook From:Colton, CA |
posted 12-18-2006 12:14 AM
Dave, Did you get both fronts or just one? |
SuperDave POA Site Supporter Prowler Junkie From:Murphy, Texas |
posted 12-18-2006 12:19 AM
I only have one of these wheels, thanks for the reply, Larry! Dave |
Larry Lord Prowler Junkie Personal ScrapBook From:Colton, CA |
posted 12-18-2006 12:26 AM
I have 2 rears but haven't been able to find the fronts.
This message has been edited by Larry Lord on 12-18-2006 at 12:31 AM |
Wayne Finch POA Site Supporter Prowler Junkie Personal ScrapBook From:Toronto, Canada |
posted 12-18-2006 09:14 AM
There are all just worthless pieces of metal. Just send them to me and I will dispose of them |
Howard POA Site Supporter Prowler Junkie From:Valencia, CA, USA |
posted 12-18-2006 09:35 AM
I think AC has the last wheel in his house. He has put a piece of glass over it, and is using it as his kitchen table. |
TOY4TWO Prowler Junkie From:MARYSVILLE, WA. USA |
posted 12-18-2006 12:16 PM
I think they were all turned into clocks ------------------ |
spoons POA Site Supporter Prowler Junkie Personal ScrapBook From:West Palm Beach, FL |
posted 12-20-2006 04:29 PM
I think the concept wheels you have awesome...I wish I had a set for my car. ------------------ |
BeWare POA Site Supporter Prowler Junkie From:Acworth , Georgia , USA |
posted 12-20-2006 04:53 PM
Those wheels were also used on the pre Prowler production test mule called the Prangler
They may have never been on a Prowler concept. I still would not mind having set. Great find. This message has been edited by BeWare on 12-20-2006 at 04:55 PM |
Larry Lord Prowler Junkie Personal ScrapBook From:Colton, CA |
posted 12-20-2006 08:16 PM
Rich, You are correct. My rear wheels are off a Prangler. The story I got is that the Prangler broke down on the side of the road in Ohio during a snowstorm. The wheels must have fallen off and rolled into a snowbank.... Lucky for me, when the snow melted and the car was gone, a very nice fellow found the wheels and listed them on ebay. He also found the four fronts (I know) but had already sold the set of 4 to a guy that planned on putting them on a B-body car. Mike Gatlin picked the wheels up in Ohio for me a few years ago when he and Karen were traveling to Vegas for a Prowler run. George Carter then brought them from Vegas to Colton for me. It pays to have Prowler friends. I've tried and tried but have yet to find a pair of fronts. I hope that someday I'll find enough wheels to make a full set. Here's the best part. He says the Prangler may still be alive. ------------------ This message has been edited by Larry Lord on 12-20-2006 at 08:29 PM |
spoons POA Site Supporter Prowler Junkie Personal ScrapBook From:West Palm Beach, FL |
posted 12-20-2006 09:01 PM
Sounds to me like someone an employee or insider at DCX parted out the Prangler before it got crushed? This message has been edited by spoons on 12-20-2006 at 09:01 PM |
cnote6 POA Site Supporter Prowler Junkie Personal ScrapBook From:Dallas, TX |
posted 12-21-2006 06:48 AM
quote:
|
NeverBland Prowler Junkie From: |
posted 12-21-2006 06:42 PM
Same as the concept prowler: |
tangled up in BLUE POA Site Supporter Prowler Junkie From:New Castle, Ind |
posted 12-21-2006 07:55 PM
...the Prangler sure was BUTT UGLY.... |
spoons POA Site Supporter Prowler Junkie Personal ScrapBook From:West Palm Beach, FL |
posted 12-21-2006 08:25 PM
Did the Prowler concept have 20" wheels on the front? They look bigger then 17". I wonder if there is a set of those concept Prowler headlight out there? What engine was in the concept car? |
SuperDave POA Site Supporter Prowler Junkie From:Murphy, Texas |
posted 12-22-2006 05:20 PM
quote: I have a great video of the Prangler somewhere, I'll post it ASAP... Dave |
BeWare POA Site Supporter Prowler Junkie From:Acworth , Georgia , USA |
posted 12-22-2006 08:30 PM
quote: According to a concept brochure from my collection here are the stats on the Prowler concept The brochure was printed 12/92 Wheelbase 111.5" 3.5 -liter V6 This message has been edited by BeWare on 12-22-2006 at 08:31 PM |
BeWare POA Site Supporter Prowler Junkie From:Acworth , Georgia , USA |
posted 12-22-2006 08:37 PM
1997 Production Prowler stats. The production car is slightly longer, wider & taller. It also has a slightly wider rear track but more narrow tires both front and back. Wheelbase - 113" Tire Size front P225/45HR17 3.5 -liter V6 This message has been edited by BeWare on 12-22-2006 at 08:48 PM |
Larry Lord Prowler Junkie Personal ScrapBook From:Colton, CA |
posted 12-05-2015 09:10 PM
Here's an oldie to refresh some memories. |
Larry Lord Prowler Junkie Personal ScrapBook From:Colton, CA |
posted 09-02-2019 06:17 PM
Here's an oldie to refresh some memories. My wheels are sold pending payment. ------------------ |
RPL POA Lifetime Site Supporter Prowler Junkie From:Rochester Hills, MI, USA |
posted 09-02-2019 08:27 PM
You sold your concept wheels???? |
MIKE GATLIN POA Lifetime Supporter Prowler Junkie From:Flushing, MI |
posted 09-03-2019 07:25 AM
quote: WHAT? After all I went thru to deliver those wheels to you! So that probably clears out the last of the clutter you have accumulated right? |
All times are CT (US) Top of Page Previous Page | Return to General Prowler Discussion next newest topic | next oldest topic |
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP