Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Bottom of Page | next newest topic | next oldest topic |
Author | Topic: Wheel Center Cap Issue(s) |
Dlugiprowler Prowler Junkie From:Wesley Chapel, FL (Tampa Bay Area) |
posted 06-23-2011 09:35 AM
Well took "Sunshine" out and about(90 miles total). She needed a bath. I washed and waxed her and then went to dry the chrome wheels with the shammy. The front driver's one fell out fairly easy with me barely touching it. I had my wife look at it, because she is more mechanical then me. She said its broken. I called the parts department and they told me to use silicone to put it back on and that way it can still come off when needed. Thoughts, advice? I'm sure if one fell off, the others will follow shortly after. Any help is appreciated. |
ALLEY CAT POA Lifetime Site Supporter Prowler Junkie From:mesa, az, USA |
posted 06-23-2011 09:46 AM
http://www.prowleronline.com/ubb/Forum1/HTML/019895.html |
Dlugiprowler Prowler Junkie From:Wesley Chapel, FL (Tampa Bay Area) |
posted 06-23-2011 09:50 AM
Thank you, off to Dennis they go. How do you remove the good ones? I don't have a manual and I don't know the proper way of removing them. Please advise. Thank you. |
ALLEY CAT POA Lifetime Site Supporter Prowler Junkie From:mesa, az, USA |
posted 06-23-2011 10:20 AM
Small slot on each cap,,,look for it, but don't use a flat bladed screwdriver to remove them. Look at the one that is already off,,,and you'll see where the slot is at. Use thin,flat plastic piece, clothes pin, popsicle stick,,something like that to pop them off. Catch 'em as they pop out. Look in the wife's kitchen gadget drawers,,,you'll find something to use, lol. This message has been edited by ALLEY CAT on 06-23-2011 at 10:24 AM |
Dlugiprowler Prowler Junkie From:Wesley Chapel, FL (Tampa Bay Area) |
posted 06-23-2011 10:29 AM
And when I get the fixed ones back, how do you put them back on? Do they snap? |
ALLEY CAT POA Lifetime Site Supporter Prowler Junkie From:mesa, az, USA |
posted 06-23-2011 12:29 PM
Just press into place...........don't use silicone! Very easy,,,even a Caveman can do it Mr. Monahan will explain when he wakes up today, lol |
Dlugiprowler Prowler Junkie From:Wesley Chapel, FL (Tampa Bay Area) |
posted 06-23-2011 12:52 PM
Stupid question, is it okay to drive without the covers until I get them back? |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 06-23-2011 01:04 PM
You can drive without your center caps on the car. You can use a screwdriver to take them off but DON'T twist it and put a rag over the end of it. It is easier to use half of a clothes pin that has a spring on it. Remove the spring and use either half of the wooden part. Send them directly to Dick Linneman. Don't worry about breaking the back part taking them off, just don't mess up the chrome front part taking them off. The repaired ones will just "snap' into place. |
Dlugiprowler Prowler Junkie From:Wesley Chapel, FL (Tampa Bay Area) |
posted 06-23-2011 01:08 PM
Thank you Ed, seriously I would have been loss without you and the Prowler family. |
bjprowler POA Site Supporter Prowler Junkie From:Clarksville,Ohio,USA |
posted 06-23-2011 01:12 PM
Dick Linneman's fix will make your center caps "better than new" and you will never have to worry about losing them due to falling off....I suggest you send him all four even if they have not yet begun to break....It's just a matter of time and you'll be shocked at what replacement caps will cost (if you can even find them) |
Hawaiian Prowler Junkie From:Newport Beach, CA |
posted 06-23-2011 03:15 PM
quote: Yes you can, but the prowler won't be as fast. |
JeraneW POA Site Supporter Prowler Junkie From:Hilton Head, South Carolina , USA |
posted 06-23-2011 08:50 PM
The "cave man" woke up (Ed) and gave you good advice. You will forever be indebted to him> |
padroo POA Site Supporter Prowler Junkie From:Chesterton, IN, USA |
posted 06-23-2011 09:27 PM
My prowler is going into the dealer for the ball joint recall, it will be interesting to see if they break one of the center caps. I have never had any of them off. |
bjprowler POA Site Supporter Prowler Junkie From:Clarksville,Ohio,USA |
posted 06-23-2011 10:14 PM
Do yourself a favor....CAREFULLY remove them before you take it in.... |
Blown632Monte Prowler Junkie From: |
posted 06-23-2011 11:03 PM
quote: Have your wife do it! Sorry, couldn't resist... |
Goop Of Oil Prowler Junkie From:Westminster, MD, USA |
posted 06-24-2011 01:45 AM
Originally posted by Dlugiprowler: Stupid question, is it okay to drive without the covers until I get them back?
quote: I disagree. Taking the caps off makes the Prowler Lighter and makes it go Faster. Growing up, anytime I drove a car without hub caps, I always felt like going Faster. It's dangerous. For safety, I would make the time that the caps are getting done, the Only time that your Prowler is a Garage Queen. This message has been edited by Goop Of Oil on 06-24-2011 at 01:50 AM |
Dlugiprowler Prowler Junkie From:Wesley Chapel, FL (Tampa Bay Area) |
posted 06-24-2011 08:53 AM
As I'm getting the wheel covers removed I was wondering... When you put the new and improved ones on they snap, but will they break if you have to remove them in the future? Any special way you got to remove the fixed ones once I receive them?I just want to make sure I'm preventing breakage after the Ed/Dennis fix. |
ALLEY CAT POA Lifetime Site Supporter Prowler Junkie From:mesa, az, USA |
posted 06-24-2011 10:37 AM
"Ed/Dennis fix"
You mean Dick? That'll be an extra charge now... |
Dlugiprowler Prowler Junkie From:Wesley Chapel, FL (Tampa Bay Area) |
posted 06-24-2011 10:40 AM
I'm like the bucket list, I call people by different names all the time. This is something that I'm working on...lol |
Greg and Veta POA Site Supporter Prowler Junkie From:Naples, FL, USA |
posted 06-24-2011 11:22 AM
I am considering Fibertop's magnetic repair. Has anyone tried that? |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 06-24-2011 02:56 PM
Once Dick fixes them, they will come off much easier. You can simply rotate them in place on the rim and pull them off without using any "tools" of any kind. |
All times are CT (US) Top of Page Previous Page | Return to General Prowler Discussion next newest topic | next oldest topic |
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP