| Bottom of Page | next newest topic | next oldest topic |
| Author | Topic: 99 Prowler Seat availabilty. |
TooHipCat     POA Site Supporter Prowler Junkie From:Londonderry,NH |
posted 04-11-2004 01:45 AM
    
Hello everyone!!! I am in the process of searching for a 99 Purple Prowler. The one I am looking at the present time shows an unusual wear spot on the outside edge of the drivers leather seat. Are there replacement seats available or can just this individual seat be reupholstered? I hope to have a Purple 99 Prowler in my possession soon. You guys are part of a pleasant and informative discussion board. Just by browsing around I have learned a lot already which of course is helping me out in my search. Please let me know what you think I should do about this drivers seat. Thanks for your help everyone and I wish all of you a Happy Easter!!!  |
BeWare                POA Site Supporter Prowler Junkie From:Acworth , Georgia , USA |
posted 04-11-2004 06:06 AM
Seats are not avialable from Mopar that I know of. I have seen seats ocassionaly on Ebay. I am getting custom upholstery, as have several on this board. I currently have no plans of selling my original seats but I have been contacted by others insterested in buying them if I do. This may give you an indication as to availabilty. From what I have seen you are looking at between $500 & $800 per seat to have it reupholstered. If it is the bottom only than it could be less. If it is the seat back you will have a difficult time finding someone that can duplicate the cat logo. Tom Mills was or is working on and upholstery deal but I have not heard in a very long time the status. |
Marty Usher POA Site Supporter Prowler Junkie From:San Antonio, Texas, United States |
posted 04-11-2004 08:12 AM
I have also had my seats redone. I have the foam and leather from my passenger seat that can put on your seat frame. My is from 2000 Prowler. I will sell both the seat back and seat cushion with faom & leather for $400 plus shipping. Someone mentioned that they thought the leather was different on 99's than on newer ones. I checked at a dealer (of course they know everything  ) and was told there was no difference. If the leather does not match you may send it back to me and I will refund your purchase price.MARTY ------------------  |
pumpkin POA Site Supporter Prowler Junkie Visit Waleke's World Personal ScrapBook From:Las Cruces, NM, USA |
posted 04-11-2004 08:35 AM
Have you thought of custom sheepskins. We put them on for around $400. A good reason for sheepskins is in the winter they are warm and in the hot summer you don't fry your butt. We got charcoal and they look great and fit like a glove. Send us a pm for the mfg of them .  ------------------ More 'Pumpkin' photos . . . . . More cars and other stuff New pictures in Personal Scrapbook (02/23/03) "The Prowler is not a car to go from Point A to Point B. The Prowler is the Point!" |
|
Bcoffman Gray Ghost Prowler Junkie From:Marshall,Mo.65340 |
posted 04-11-2004 09:51 AM
I bought my first Prowler in 2000. After I bought it, I found a bad spot in the leather on the drivers seat. It was a very thin spot in the leather on the left seat bolster. When I showed it to my dealer, they ordered a new seat cover from the factory. As I remember, there was a zipper on the cover that came off and also one on the seat that went on. I think the Prowler tech there at the dealership just unzipped the old one and pulled it off. Then he just slid on the new one and zipped it up. I might be wrong, but, that is how I remember it. You might check to see it anything like that is still available. Worked for me. |
meancat POA Site Supporter Prowler Junkie From:MODDERSVILLE, MICHIGAN |
posted 04-11-2004 10:04 AM
Do a search someone on free classified ad's had some for sale. You can buy them for nothing(MAYBE) ------------------ |
|
TooHipCat POA Site Supporter Prowler Junkie From:Londonderry,NH |
posted 04-11-2004 10:36 AM
Once again I want to thank everyone for giving me such great advice on the worn drivers seat on the 99 Prowler I'm looking to purchase. It actually looks like a bad wear spot caused by its current owner. Please check out the enclosed pic and see just what you guys think. I don't feel that just by hitting that spot with a little vinyl dye it will make it all go away. Thanks again everyone and Happy Easter!!! You guys are 2 cool!!! |
|
Tom Mills POA Site Supporter and Vendor Prowler Junkie Tom Mills / Jefferson Auto prowlerparts@jeffersonautocollision.com From:Niles, MI and Punta Gorda FL |
posted 04-11-2004 10:37 AM
The leather on the 2000 and later models is smoother and softer and a bluer grey color. I may have a used cover for a 99 that may work for you. |
|
BeWare POA Site Supporter Prowler Junkie From:Acworth , Georgia , USA |
posted 04-11-2004 10:41 AM
That is correct the seat backs unzip down both sides and slide off. You have to remove the headrests first. They are held on with two clip wires that you can reach when you un zip the backs. The bottom cusions are held on with clips or hooks. The leather and the foam are attached and come off as a single piece leaving only the seat frame. . I am keeping my old seat foams and leather. I obtained another set to have recovered. Tom good to hear from you. Where have you been? How is the bullet nose Stude coming? This message has been edited by BeWare on 04-11-2004 at 10:43 AM |
|
TooHipCat POA Site Supporter Prowler Junkie From:Londonderry,NH |
posted 04-11-2004 10:44 AM
Sorry...I don't know what happened to that pic I just tried to upload to show the rub spot on the seat. I will keep all of your comments and suggestions in mind. I may not even buy this one cuz I'm going down to RI tomorrow to look at a 97 Purple Prowler. Thanks again everyone!!! |
bruce hazelton Prowler Junkie From:burlington,wi 53105 |
posted 04-12-2004 08:06 AM
TooHipCat, according to the 99 parts catalog the part number has not changed. It's a complete cushion with cover and pad. The cover is not available separately. List price $985. POA price $649. Recovering may be the most economical way to go. Bruce ------------------ |
catfish POA Site Supporter Prowler Junkie From:scottsdale,az,usa |
posted 04-12-2004 11:25 PM
if you need to a good upholstry shop can repair the worn sections of the seat.you could dye it,but thats a temporary fix,and wont last long.jmo. ------------------ |
|
Tom Mills POA Site Supporter and Vendor Prowler Junkie Tom Mills / Jefferson Auto prowlerparts@jeffersonautocollision.com From:Niles, MI and Punta Gorda FL |
posted 02-27-2008 08:06 PM
This message has been edited by Tom Mills on 02-27-2008 at 08:08 PM |
TLRandall POA Site Supporter Prowler Junkie From:CALDWELL, TX, US |
posted 02-27-2008 08:14 PM
My 99 Purple seats are different from my 2001 Mulholland. The 2001 are much smoother leather. ------------------ |
|
catfish POA Site Supporter Prowler Junkie From:scottsdale,az,usa |
posted 02-27-2008 08:22 PM
not sure if still available from chrysler.tl is right on the leather.first 99s had a rougher leather and later 99s much smoother.which one is yours.you might have to compare to another 99 to figure it out.when they changed to the smoother leather all the later ones are the same. ------------------ |
SirReal POA Site Supporter Prowler Junkie From:Burtonsville,Md Good ole U.S.A |
posted 02-27-2008 08:24 PM
This is an archived topic. Check the date. |
|
TLRandall POA Site Supporter Prowler Junkie From:CALDWELL, TX, US |
posted 02-27-2008 09:15 PM
Ahhh, yup, a lot of those showing up lately!!!! lol |
|
catfish POA Site Supporter Prowler Junkie From:scottsdale,az,usa |
posted 02-28-2008 01:09 PM
yep,saw that,anawered anyway for the newbies,they can always use more info. ------------------ |
Gene POA Site Supporter Prowler Junkie From:St.Petersburg,Fl USA |
posted 02-28-2008 03:40 PM
Take to a good trim shop and they can insert just that piece on the bolister.I have had several seat repaired by having new material sewed in (inserted) and trimer can match up orginal leather.That spot wears due to getting in and out and butt rubbing it.Vettes also bad for this.I have a streetrod and had to redie it and came out nice and that was appro.1 year ago.A body shop paint suppliers can match color if want to dye. |
|
TooHipCat POA Site Supporter Prowler Junkie From:Londonderry,NH |
posted 02-28-2008 05:37 PM
quote: WOW...can't believe this thread was brought back to life...lol. I ended up getting the 97 after all. Brian |
2000 Black with hand painted blue faded to purple flames
All times are CT (US) Top of Page Previous Page |  Return to General Prowler Discussion next newest topic | next oldest topic |
  |
|
Contact Us | Prowler Online Homepage
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP
