Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Bottom of Page | next newest topic | next oldest topic |
Author | Topic: hubcaps |
jb POA Site Supporter Prowler Junkie Personal ScrapBook From:Keller,Tx |
posted 09-30-2000 09:48 PM
After reading the post about breaking off the tabs of the hubcaps, I am wondering- is there a secret to taking these off? I'm getting ready to put the ceramic brake pads on my kat and don't want to screw it up. Any hints? thanks ------------------ |
MidlifeProwler Prowler Junkie From:Silver Spring, Maryland USA |
posted 09-30-2000 10:50 PM
JB, The chances are less if you remove the center cap by using 2 tools instead of 1. When you pry on it to get it off, just make sure it comes out straight towards you instead at an angle. That's how I broke my 1st one by prying on the slot with 1 tool only. Good Luck! |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 10-01-2000 03:25 AM
I wrapped a rag around a regular screwdriver and did not have a problem. I may have used two screwdrivers, just don't twist the screwdriver. |
PhxSuncat unregistered Personal ScrapBook Admin Use |
posted 10-01-2000 10:40 AM
Mopar parts department shows two chrome caps listed. One is about $25, the other about $60. Diff. is ?? |
jb POA Site Supporter Prowler Junkie Personal ScrapBook From:Keller,Tx |
posted 10-01-2000 12:44 PM
thanks guys. keep your fingers crossed. gonna try it this afternoon. jb ------------------ |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 10-01-2000 07:34 PM
PhxSuncat, would it be the chrome versus earlier painted ones???? |
WildCat POA Site Supporter Prowler Junkie Personal ScrapBook From:North Louisville, Indiana, USA |
posted 10-01-2000 08:54 PM
I cracked one of mine reinstalling it. Was in a hurry and not in best position to install. I have taken mine off several times without problem UNTIL I was in a hurry at myself I will check with friend who just so happen to have been injection mold supervisor for the company that made them. I will try and let you know this next weekend what he say's. Larry |
PhxSuncat unregistered Personal ScrapBook Admin Use |
posted 10-01-2000 09:22 PM
Ed - The parts counter said there are three caps. 1 for the early polished wheels, and 2 types for the chrome? Plastic versus metal? ------------------ |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 10-01-2000 10:34 PM
Somebody give us the answer, obviously I don't know, just took a guess. |
dpena POA Site Supporter Administrating Kat Visit Dan's Prowler Excitement Personal ScrapBook From:San Jose Ca Santa Clara |
posted 10-02-2000 03:54 PM
I just bought a center cover for my kitty since I too broke one. The cost for me was 57 dollars and change. I asked what the best way to remove these covers were and got a very carefully. Later... ------------------ |
j paulsen Prowler Enthusiast From:Columbus, ohio usa |
posted 10-02-2000 04:17 PM
Hey Pena, let them cover them under warranty until they can come up with some way to make them not so flimsy. Keep up the good work on your website! |
dpena POA Site Supporter Administrating Kat Visit Dan's Prowler Excitement Personal ScrapBook From:San Jose Ca Santa Clara |
posted 10-02-2000 06:48 PM
j paulsen, Neglected to do that and will check it out. Thanks for the compliment and will try my best! ------------------ |
Nyle Wing Prowler Junkie Personal ScrapBook From:USA. |
posted 10-02-2000 07:14 PM
I have had 3 center cap tabs break and I was very very careful too. all have been warranted with no problems. I noticed on the last new cap that there was some little pins added behind the clips to prevent them from bending to far. Hope that they work. ------------------ |
All times are CT (US) Top of Page Previous Page | Return to General Prowler Discussion next newest topic | next oldest topic |
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP