Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
Bottom of Page | next newest topic | next oldest topic |
Author | Topic: Spinners last call |
wallygator310 POA Site Supporter Prowler Junkie From:DeLand, FL USA |
posted 02-27-2005 10:08 AM
This is the last call for this run of Jimmy Dale's billet spinners. You can go to the post in the Performance/Appearance section http://www.prowleronline.com/ubb/Forum9/HTML/001994.html to read more on the topic and see the product. Once he orders the material, that's all he'll make on this run and then he will need at least 5 more sets to make another run. If you are interested, send a check out in the next few days for $625 which includes shipping and lug nuts to: Jimmy Dale
This message has been edited by wallygator310 on 02-27-2005 at 10:09 AM |
tangled up in BLUE POA Site Supporter Prowler Junkie From:New Castle, Ind |
posted 02-27-2005 11:57 AM
...high quality..... |
tangled up in BLUE POA Site Supporter Prowler Junkie From:New Castle, Ind |
posted 02-27-2005 12:22 PM
...the wheel must be removed....the center hub is installed from the back side(can't fall off) and is secured in place with the three set screws included....the screws tighten against the inside of the wheel, they are only there to keep the center hub from rotating, not from falling off..... ...the spinners are threaded on just like the real thing....tightened with a wooden mallet, or any mallet with a rag to prevent damage to the spinner....periodic checking of the spinners is recomended, but not really necessary.... ...theft, seriously doubt most people would figure out how to get the spinners off, or have the necessary tools handy.... ...changing a tire would require loosening(unscrewing) of the spinner to give access to all lug nuts...one or possibly two lugs might be difficult to access with the spinner in place... ....hope this helps... PS...had mine installed at a tire store for $40.....took them about an hour as they were very careful with the car and the parts....could easily be done at home if you have a jack and don't mind wrestling the large tires into place.... |
All times are CT (US) Top of Page Previous Page | Return to General Prowler Discussion next newest topic | next oldest topic |
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP