| Bottom of Page | next newest topic | next oldest topic |
| Author | Topic: Baffling Question ? |
Eddie Powell    POA Site Supporter Prowler Junkie From:Marietta , Georgia |
posted 02-10-2003 07:03 AM
    
I removed the baffles yesterday. Does anyone know if this affects the warranty ? |
Marty Usher       POA Site Supporter Prowler Junkie From:San Antonio, Texas, United States |
posted 02-10-2003 07:16 AM
Removing the baffles should have no effect on your warranty. Even if it did, I doubt the dealer/service tech would ever notice you have removbed them unless you told them. |
ALLEY CAT           POA Lifetime Site Supporter Prowler Junkie From:mesa, az, USA |
posted 02-10-2003 07:24 AM
Eddie - NO effect,,,,,just better sounding! |
|
Tom Santella Prowler Junkie From:Sandy Hook Ct. USA |
posted 02-10-2003 02:01 PM
I am thinking of this also. Is it a difficult job. I'm a little snow bound right now. ------------------ |
ed monahan POA Lifetime Site Supporter Prowler Junkie Personal ScrapBook From:Cincinnati, Oh, USA |
posted 02-10-2003 02:10 PM
Tom, I did not remove mine but you have to remove two rivets from each tailpipe and simply pull out the baffles. Some baffles are a little tougher to pull out than others. You may need to grab them with a vice grip. Make sure after you grind off, or drill out, the rivet that it is completely inside the baffle before attempting to pull out the baffle. You may have to gently punch it. |
|
Tom Santella Prowler Junkie From:Sandy Hook Ct. USA |
posted 02-10-2003 04:03 PM
Thanks Ed. It seems like maybe even I could do that. ------------------ |
|
Eddie Powell POA Site Supporter Prowler Junkie From:Marietta , Georgia |
posted 02-10-2003 06:26 PM
Tom, these two rivets are on the top of the tail pipe. At first I thought everyone was talking about the four spot welds in the end of the tailpipe. I couldn't understand why I had four and everyone else had two. |
|
Tom Santella Prowler Junkie From:Sandy Hook Ct. USA |
posted 02-10-2003 06:36 PM
Thanks for the tip Ed. Will this make it just louder or make it more of a throaty sound? ------------------ |
|
ALLEY CAT POA Lifetime Site Supporter Prowler Junkie From:mesa, az, USA |
posted 02-10-2003 08:57 PM
quote: Alittle of both! You will like the sound over the baffle tone. Good luck |
|
Eddie Powell POA Site Supporter Prowler Junkie From:Marietta , Georgia |
posted 02-11-2003 06:43 AM
A little more throaty when you "get on it". |
|
ALLEY CAT POA Lifetime Site Supporter Prowler Junkie From:mesa, az, USA |
posted 02-11-2003 07:02 AM
At idle, not much diff. Throatier (is that a word?) when you reach mid to high rpms. |
|
Tom Santella Prowler Junkie From:Sandy Hook Ct. USA |
posted 02-11-2003 10:43 AM
Thanks AC, I actually used "throatier" myself and then deleted it because it didn't look right.lol I just need some roads without sand and salt!!!!!!!! |
Balistk POA Site Supporter Prowler Junkie From:Orlando FL |
posted 02-11-2003 11:33 AM
Eddie, I took mine out a little while ago but it did not give me the sound I was looking for. Yes, it will add a little deeper sound, but not to the extent of what I was looking for. I also tried going straight pipe with the Baffles in but that didn't do the trick either. The last process I tried was to put "2" 24 inch glass-packs on it, and "BOOM", that was the sound I was looking for. Just to add a little more gurgle sound to it I replaced my tips this past weekend with higher performance tips (which really added a lot.) Below are the links if you want to hear what my Kat sounds like prior to replacing the tips (I will be posting new animations later this week with the new tips on). |
All times are CT (US) Top of Page Previous Page |  Return to General Prowler Discussion next newest topic | next oldest topic |
  |
|
Contact Us | Prowler Online Homepage
All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP
