T O P I C R E V I E W |
robin | rims with a 1.25 spacer
|
Dano | What spacers do you use? I want a 3/4 or 1" spacer that has the correct size center hole to center itself over the hub just as the wheels do, and also have the same sticking out the other side of the hub so that the wheel can center properly on the spacer. Not sure that I am explaining this properly so here is a picture: Anyone know of the proper spacers? I have done extensive research but I cannot find any that gives me the sizes of the center so that I can know it will fit - all I see is 'this fits Plymouth Prowler'.
|
padroo | Here is a list. http://www.google.com/search?q=spaacers+site%3Aprowleronline.com&rlz=1C1CHFX_enUS573US573&oq=spaacers+site%3Aprowleronline.com&aqs=chrome..69i57.17495j0j8&sourceid=chrome&ie=UTF-8 |
robin | http://www.ebay.com/itm/2pc-5x4-5-5x114-3-Wheel-Spacers-1-Fits-Hyundai-Infiniti-Jeep-Kia-Lexus-Genesis/132242784557?hash=item1eca48c12d:g:hlgAAOSw8cNUUXDE:sc:ShippingMethodStandard !95993!US!-1&vxp=mtr 6061 Billet Aluminum Lug Centric design Bolt Pattern: 5 x 4.5" / 5 x 114.3mm 1/2" Studs, pre-installed Hub Bore: 82.5mm Outside Diameter: 150mm Spacer Thickness: 1.0 inch Includes lug nuts for mounting wheel to spacer Easy Installation Brand New 1 Year Warranty Free shipping to Continental USA! This message has been edited by robin on 02-26-2018 at 12:21 PM |
robin | 20 inch rear wheel. F10320006555 20x10 5x114.3 5.5 WHEEL DIAMETER: 20 in. COLOR: Raw BOLT PATTERN: 5x114.3 mm OFFSET: 1 mm WHEEL SIZE: 20x10 MARKETING COLOR: PVD MAX LOAD (SINGLE): 1600 lb. WEIGHT: lb. BACKSPACING: 5.5 mm BORE DIAMETER: 72.6 mm MADE IN USA: No
|
401KAT | Robin I think Dano is looking for hub eccentric...not lug eccentric like those are...but they would work...jim |
Landscape Doctor | quote: Originally posted by robin: [URL=http://www.ebay.com/itm/2pc-5x4-5-5x114-3-Wheel-Spacers-1-Fits-Hyundai-Infiniti-Jeep-Kia-Lexus-Genesis/132242784557?hash=item1eca48c12d:g:hlgAAOSw8cNUUXDE:sc:ShippingMethodSta ndard]http://www.ebay.com/itm/2pc-5x4-5-5x114-3-Wheel-Spacers-1-Fits-Hyundai-Infiniti-Jeep-Kia-Lexus-Genesis/132242784557?hash=item1eca48c12d:g:hlgAAOSw8cNUUXDE:sc:ShippingMethodSt andard[/URL] !95993!US!-1&vxp=mtr6061 Billet Aluminum Lug Centric design Bolt Pattern: 5 x 4.5" / 5 x 114.3mm 1/2" Studs, pre-installed Hub Bore: 82.5mm Outside Diameter: 150mm Spacer Thickness: 1.0 inch Includes lug nuts for mounting wheel to spacer Easy Installation Brand New 1 Year Warranty Free shipping to Continental USA!
^^^^^^^^^^^^^^^^^^^^^^^^^ Dano, These are the ones I have. PS, They do rub when hitting hard bumps. This message has been edited by Landscape Doctor on 02-26-2018 at 09:34 PM |
Dano | quote: Originally posted by Landscape Doctor: ^^^^^^^^^^^^^^^^^^^^^^^^^ Dano, These are the ones I have.PS, They do rub when hitting hard bumps.
Dangit! That is not what I wanted to hear. No rubbing allowed !!! |
Landscape Doctor | quote: Originally posted by Dano: Dangit! That is not what I wanted to hear. No rubbing allowed !!!
I would say 3/4" would not rub and would still look good. |
kayaksrfr1069 | Dunno about you guys, but I cant find a 3/4" spacer anywhere with an 82.5 (or 72.6)cb... I agree 3/4 would look great. This message has been edited by kayaksrfr1069 on 03-08-2018 at 08:57 PM |