Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
| |||||
Want to register? |
If you have previously registered, but forgotten your password, click here.
I bought a used ECU a year ago from a wrecked Prowler for $800 to give you an idea of what a used one may go for. Or contact Don Scharf Automotive (p) 715 479 8597 about used Prowler parts ..they have lots of used Viper parts and some Prowler parts If you think your ECU is totally shot and you want to try a used one to see if it solves your problem I can send you my spare one for cost of shipping to and from. (note I won't be home from a business trip until Oct 14th. If your looking to fix a broken PCM/ECM, then contact these guys for repair and reprogramming (Flash). This message has been edited by Tomcal on 10-04-2018 at 05:51 PM Marathonservice1 I'm looking for an ECU for my 2001!!
Thanks,
RonMarty Usher As an alternative you my want to contact B&G performance about refurbishing your existing ECU
http://www.bgperformance.com/
870 Hwy. 17 South
Eagle River, WI 54521
PJ Kohlman <pjkohlman@live.comMarathonservice1 Thanks Marty! Please contact me when you get back from your trip to see if I had any luck (or I'll contact you if did too).
RonMarty Usher sent you a PM with my personal email.....I am logging here and a lot of other sites less and less due to work overload situation Dano Check with your local Chrysler dealer. I was able to get a refurbished BCM that came with a warranty. Marathonservice1 Thanks Dano, I'll reach out to them!! Tomcal Sorry, didn't see Marty's earlier post. I'd go with them. Marathonservice1 Thanks Tomcal, I am looking for an ECM I can have flashed for my car that can be used (swap out) when I have to have to pass California's smog check every 2 years! Tomcal Just curious. Is your current PCM/ECM that's install, modified so it wouldn't pass smog inspection?
All material contained herein, Copyright 2000 - 2020