Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
| |||||
Want to register? |
If you have previously registered, but forgotten your password, click here.
This is really looking good for us. They have been in the process of installing a new computer system throughout. So they've had to take a small break from the development dept while completing. BUT....Glen informs me that they're at this point committed to doing these. Says once done they will be part numbered and cataloged. We will be able to go to O-Riely's(spelling) auto parts and buy them as well! So once they've developed them and their ready for purchase there not going away. Rare Parts has potential to fabricate and develop other areas of concern for us so after these are a go we might want to look into other possible needed pieces. Glens going to be calling me with an update and I will relay to all. So everyone hang in there who needs these ball joints. Can't say for sure at this point...BUT it looks like their on the way. Will advise......Mike This message has been edited by dru on 05-31-2018 at 09:51 PM ------------------ Hopefully you are in the final stretch of this project. Very good work and greatly appreciated....I know you put a lot of time into this! Lou Over the years there has been several people that have spent their time, money and intense efforts to make replacement parts and great cosmetics for these unique cars. Even all the great technical information takes a big effort by someone. This ball joint issue is another problem we will solve and keep these Prowlers(and their value)relevant in today's car market. That's the plan anyway!!! Will advise as I get updated information from Rare Parts.CAT-A-TONIC Spoken with Glen at Rare Parts. Big thanks to Brad for sending them the 2 two used ones. garysss Sounds great! Thanks for keeping us updated and all your time you put in. 401KAT Mike ...I'm buying YOUR 1st set......Thanks again....jim ed monahan Outstanding news. Thank you very much. RPL If they develop them, they should contact MOPAR and offer to sell them to them to fulfill their recall requirements. dru WHOO HOO!!!!!!. I'll buy a set ASAP. I'm not waiting on Ed again!! LOL
Thanks for all your time and effort in this Mike.ClayD Great news!!! Many thanks for your efforts, Mike! u00tjs2 Great Job! Thanks to all who started this process and have been involved in helping make this happen!
[img]http://www.prowleronline.com/ubb/smilies/blueprowl.gif[/img]enzvoy awesome news , great work
thanks for doing thisstprinz awesome news. We in Europe at the 4. European Prowler Owwners metting just talked about this issue. for shure i will order asap one for me and i guess some more in Europe will be sold.. BradleyG WOW!!!! This is really great news.
THANK YOU FOR taking the bull by the horns and getting this done. quincy Mike, Thank you very much for chasing this to the ground. scottmartin you are the man! Great job! CAT-A-TONIC Thanks to everybody, BUT, I don't want to que the applause button until we have the actual finished product.
Mike
All material contained herein, Copyright 2000 - 2020