Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
| |||||
Want to register? |
If you have previously registered, but forgotten your password, click here.
You can also take them to some auto parts stores in your area that have a machine shop to have them drilled & slotted for a nicer look This message has been edited by phil2237 on 06-20-2017 at 02:46 PM ------------------ You can also take them to some auto parts stores in your area that have a machine shop to have them drilled & slotted for a nicer look Andria... Thank you so very much for sharing your info and for all the hard work and research!!! Phil... Thanks for all the efforts and for confirmation!!! I am the proud owner of 3 pairs (Ceramic pads have been ordered).... Just awesome!!!! Maybe Tony can remove this misinformation. This message has been edited by mslc10 on 10-15-2020 at 02:35 PM phil2237 If You are looking for REAR ROTORS for your Prowler, You can switch over to cast iron rotors. These Rotors are available from any NAPA AUTO PARTS location. By using cast iron you will add a few pounds to your car, but you will be able to use ceramic pads.
THE NAPA PART NUMBER IS NB 4885993
If anyone has a problem ordering them, I can get them for $ 38.50 each WildCat quote:
Originally posted by phil2237:
If You are looking for rear Rotors for your Prowler, You can switch over to cast iron rotors. These Rotors are available from any NAPA AUTO PARTS location. By using cast iron you will add a few pounds to your car, but you will be able to use ceramic pads.
THE NAPA PART NUMBER IS NB 4885993
If anyone has a problem ordering them, I can get them for $ 38.50 each
Another great find!
Larry & Sue Mayesgarysss Thanks Phil Good Info. phil2237 You will most likely be able to go to ANY auto parts store & give them the NAPA number to cross over to a different brand as this Rotor is made by many manufactures. Do not use any other number to cross as the other number posted is a larger rotor. So if you don't have a Napa dealer in your area , don't panic alrtg Just for future reference, the following post has additional information related to these rotors.
http://www.prowleronline.com/ubb/Forum2/HTML/005536.html quincy Excellent! Thank you for your hard work! quote:
Originally posted by phil2237:
If You are looking for REAR ROTORS for your Prowler, You can switch over to cast iron rotors. These Rotors are available from any NAPA AUTO PARTS location. By using cast iron you will add a few pounds to your car, but you will be able to use ceramic pads.
THE NAPA PART NUMBER IS NB 4885993
If anyone has a problem ordering them, I can get them for $ 38.50 each ClayD Thanks, Phil! ed monahan Thanks Andria and Phil. Great work. Richnew41 Great example of "Never hurts to ask" and even a better example of what POA and its members... Professor Prowler I ordered 2 rotors from Napa with that part number for my recently purchased Prowler, and FYI they did not fit, not even close. They were too small, even the lug spacing was too small. Does anyone have an update, perhaps the part number has changed? Thank you in advance. jwallis There’s a set for sale in the classified section here . The original ones were discontinued and no longer available. robin These will not work. don't order???? mslc10 the rotors are listed for a '89 le baron, I looked up bolt pattern for the '89 le baron , it is 5x100, the bolt pattern for a prowler is 5x114.3
napa website says bolt diameter circle is 3.937 inches = 100 mm....so no go. Just by bolt pattern they won't fit as Professor Prowler stated. Thank you for raising this, Professor!Professor Prowler I am happy to help, thank you for your kind words!
All material contained herein, Copyright 2000 - 2020