Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
| |||||
Want to register? |
If you have previously registered, but forgotten your password, click here.
They are a bit rusty looking. This message has been edited by DrillinU on 09-22-2014 at 02:02 PM So it cleans batty terminals, glass so why not try cleaning nuts So it cleans batty terminals, glass so why not try cleaning nuts thank you, will try that, the most it will cost is $1 to try so why not. thank you This message has been edited by mslc10 on 10-10-2014 at 03:53 PM DrillinU Without taking off the bolts on the A-Arms,
what is the best way to clean them off?xtreme prowler I used paint... DrillinU Thinking some sort of a buffing way before I would paint them. quote:
Originally posted by xtreme prowler:
I used paint...WildCat Seen someone using coke to clean rust DrillinU quote:
Originally posted by WildCat:
Seen someone using coke to clean rustxtreme prowler I used a bit of silver rust paint.... looked good quote:
Originally posted by DrillinU:
Thinking some sort of a buffing way before I would paint them. DrillinU quote:
Originally posted by xtreme prowler:
I used a bit of silver rust paint.... looked goodmslc10 the coke made my nuts sticky (someone had to say it)
All material contained herein, Copyright 2000 - 2020