Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
| |||||
Want to register? |
If you have previously registered, but forgotten your password, click here.
------------------ ------------------ toys ------------------ ------------------ ------------------ ------------------TX Prowler My malfunction indicator light came on my car this weekend. Has anyone else had this light come on? catfish yes,you need to have somebody hook up a scanner to pull the code that has been set.let us know what the code is. idive Go to Autozone and tell them you need a code read. Have them print it up for you.
Was the car acting up?ed monahan If you gas cap isn' on tight, a couple of clicks, you could set a code. There are hundreds of things that it could be. EssexExport Like Ed said, check the gas cap. Has happened to me a couple of times: it wasn't on properly. If that's the case then disconnect one of the battery cables for a couple of minutes, reconnect, & the light will go out. Do not take the car through any kind of state inspection until you've racked up at least 100 miles. This give the car's computer the needed mileage to reset. catfish if its the gas cap,all you need to do is go thru 3 drive cycles and the lite will go out and the code will erase itself.if thats the case. toys Not saying this is the problem but it could also be a defective gas cap TX Prowler The car was not acting up. I will get a code pulled and let everyone know. Thanks catfish probably a emission code. TX Prowler I had a mechanic friend pull the code and clear the code on my car. Two codes came up - PO442 and PO455. He said for me to open my gas tank and put the cap back on and make sure it clicks. I then went and filled my car up and made sure the gas cap clicked. He said if the light comes back on he has another scanner that he can try. catfish its not the gas cap.its a small and a large emission leak.read the post by knight47 on page one about 8 down in technical.youre hoses on emission cannister are split. rotted.your answer is in that post. TX Prowler Thanks everyone. catfish by the way dont waste your money on a smoke test its not needed,just inspect those hoses,thats your problem. TX Prowler Thanks catfish read my emission leak tips in tech.sorry i steered you to the wrong post.
All material contained herein, Copyright 2000 - 2020