Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
| |||||
Want to register? |
If you have previously registered, but forgotten your password, click here.
There is a wealth of information to be found in the archives of this site and the people here generally speaking are the best. With that said take some time to look in the technical questions & answers section as well as the Prowler reproduction parts discussion section. Keep in mind that these cars were mostly hand built and limited production. Do not be deterred by the uniqueness of the car but rather be enthused by it. There are some differences between the earlier and later cars but for the most part one is as good as the other. Best of luck finding the right Prowler for yourself, it will change your life in a positive way. So, I thought, I better ask the people who own them!!!! I also replied to you in the technical section.famaro I'm looking at buying a Kat.
What are the common issues or problems these cars have and what should I look for?
Thanksjimsutton Getting use to people smiling at You when You drive by ..and asking what it is ........ alrtg Hi there and welcome to the forum.
Most here are absolutely willing to help in whatever way they can.
The subjects discussed in those sections should give you some insight as to the issues to be aware of.famaro Thanks,
Yes, I have been looking at the technical questions & answers section. From what I can see so far there are common issues with the cd players and front ends?
I'm looking at a 2001, but open to other cars as well.
Are they easy to service your self or does one have to take it to a mech. for everything?idive Good luck on finding the one for you. I may be able to assist you in a 97 if you change your mind on that 01.
I'm not too sure what problems you're referring to on the front end. There was a recall issue with the lower ball joint. Other than that, some had dynamic shocks that leaked. The koni's didn't leak and are still available. And the hood shocks go bad, but we have better replacements for those, or you could go with a prop rod.
All material contained herein, Copyright 2000 - 2020