| T O P I C R E V I E W |
| FL Phil | Someone sent me this prototype to see if there would be any interest. As shown could be used as shown as a paper weight.
Another option would be welded on a stand. The size is 10" x 4" x 1/8" steel.
They would be offered in a single color and there could be an option to have the raw steel so you could have your favorite paint shop match your car. He had thought a price around $20 - $25. Please let me know what you think. 
Picture taken on glass 
Picture taken on white paper. This message has been edited by CA Phil on 08-28-2005 at 12:44 PM |
| Dave Mills | image is not showing up, Phil |
| Wayne Finch | |
| FL Phil | Thanks, I was challanged for a couple of minutes. |
| Dave Mills | I would be interested, if they all ready came painted to match the cars and pay a couple bucks more. |
| Snoman | Mail box topper |
| Randy Cobb | Weather vane topper. |
| butchcee | cool idea and a reasonable price at 20 bucks. Are the high lites cut through also? How's it cut?-flame, water jet? If water, you could cut aluminum if someone wanted? |
| Kraut | CA Phil, The picture is not very good. It appears to have some surface characteristics, but it's difficult to tell from the picture. Could you try again with a better picture? Also, how is this thing cut from 1/8" steel. Are you using laser, water jet, stamping?? Just curious.
|
| FL Phil | They would come painted or powder coated and not in the car colors but could offer them either painted or not. I'll take a better picture over the weekend and replace the one that is currently posted. Where you see the lines they are cut through. The steel is cut by a robot that has a plasma cutter attached. |
| FL Phil | New pictures. |
