Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
| |||||
Want to register? |
If you have previously registered, but forgotten your password, click here.
Good luck! Jay Good luck Thanks for the input. I'll look at the other posts. If I have any questions, I'll ring you. Thanks Rick If the speedo works it's the input sensor, if speedo doesn't work it's the output sensor. ------------------rmatzko Left the house today and my Prowler stayed in wouldn't upshift, the speedometer didn't work, and the engine waring light came on. I was able to determine it was in stuck in 2nd gear by going into manual shifting. Anyone suffered the same fate or have heard of same. HELP YELLER CAT Rick
Sounds like the classic output sensor failure...easy do it yourself fix. Call if you need any help toll free 877 KAT-PACK. Marty Usher The tranny has gone into "limp mode". Ususlly it's a input or output sensor. Do a search for LIMP MODE and you can read numerous posts about it and how to determine if it is input or output and other possible causes. rmatzko Jay and Marty, Marty Usher Check out Dan Pena's site www.prowlerexcitement.com also. He has pics of the sensors. WildCat I bought input & output sensors at Napa, have not had to use them yet, but carry them when traveling.
Larry & Sue Mayes
All material contained herein, Copyright 2000 - 2020