Home Page Owners Registry Discussion Forums ProwlerMall Event Scrapbooks About
Forum:General Prowler Discussion
Topic:Chrome license plate frames
Want to register?
Who Can Post? Any registered users may post a reply.
About Registration You must be registered in order to post a topic or reply in this forum.
Your UserName:
Your Password:   Forget your password?
Message Icon:                                                             
                                                            
                                                            
                                                            
                                                            
                                                            
                                                            
                                                            
                                                            
                                                      
Your Reply.:


*HTML is OFF
*UBB Code is ON

Insert Smilie into your post <-- Click on Smilie face
to insert a Smilie Into Your Message

Image Posting Instructions
Click here to upload a picture from your computerClick for UBB Code Help
Bold Italicized Underline Centered Insert Hyperlink into your post Insert Flash Animation into your post Insert Email hyperlink into your post Insert Image into your post Insert Audio into your post Insert Code into your post Insert Quote into your post Insert List into your post Insert Smilie into your post Click to check the spelling in your message
Mode:   Off     Help     Prompt     Inline  
Options Email Notification: E-mails sent to you whenever someone replies. Only registered users are eligible.
Disable Smilies in This Post.
Show Signature: include your profile signature. Only registered users may have signatures.
*If HTML and/or UBB Code are enabled, this means you can use HTML and/or UBB Code in your message.

           

If you have previously registered, but forgotten your password, click here.

T O P I C     R E V I E W
ed monahan
I just ordered 50 of the plate frames. They will be chrome plated brass with the idents for the stickers on the bottom. The local woman who I talked to is reasonably sure this can be accomplished.
She has to order out of California and will let me see the mock up pictures in the next day or two. I told her to order them if they are what I described.
Here is a link. http://www.licenseframe.com/frames.htm
Click on Engraving Samples and then click LF321-4H
If you read below the picture it explains that the plate can be flipped with just two holes.
The price will be $ 28 or 29 probably, plus shipping.
To get the tabs put on the frame we needed to order 1250 pieces and they would be made overseas.

After everything is finalized I will post the rest of the info. I can accept Paypal but not Paypal with a credit card. I can also set aside frames to deliver in Texas and even Niagara Falls without any delivery charge.
Hopefully everything will be finalized in the next couple of days. These will be made in the USA, by the way.

This message has been edited by ed monahan on 03-29-2004 at 10:42 PM

GenoTexEd... if it works out OK for the bottom stickers.. please bring me one to Texas.. thanks Man
ed monahangot you covered.
warmncoolEd, I will take one..I will be in Texas, if you need $$$ before then let me know...Thanks, Larry
BeWareEd I will take two. I will take delvery in Texas. If you need money ahead of time let me know.
Dale BeamanI will pick up one in Texas.

Thanks
Dale

ed monahanDale and Rich, got you covered, also. Thanks.
DublinOH5 please.
ed monahanOkay. Texas?
Here is the link to the orhttp://www.prowleronline.com/ubb/Forum7/HTML/000212.htmliginal thread.


Mike, you can close this one off if you would like.

This message has been edited by ed monahan on 03-31-2004 at 02:23 AM

ed monahanI just looked at the proposed frame and told them to cancel the order.
They can only put the cut-outs at the bottom with 4 holes. The printing would have to be adjusted to fit in between the holes. I was under the impression they could do it with just two holes and so was the local sales person. Apparently the frames all have holes on the edge where the indentations are located. If you flip it, the holes would be at the bottom but we need holes at the top, hence, four holes only.
If there is enough interest in more frames EXACTLY like they were originally made and sold by GaryC, I will order 50 of them.
Post in the Merchandise section if you are interested in buying the original type plate frame. http://www.prowleronline.com/ubb/Forum7/HTML/000268.html

Sorry to get everyone's hopes up. I thought it was a go.

This message has been edited by ed monahan on 04-01-2004 at 02:57 PM

WildCatED,

you might reconcider the frame with 4 holes.

IF.......they can get the lettering to look right the extra holes would be good to secure the plate to the frame at the bottom....for the states that are using THIN FLAT STEEL plates this would keep them straight in the frame. Using short machine screws with chrome caps would look OK.

I do not need the reversed frame for the Cat, but I would like the screw holes at the bottom.....MY 2 CENTS

LeoPlease add 2 for me. I can prepay any way you wish, including paypal.
Thanks, Leon Belardinelli
ed monahanLarry, are there four holes in the car?

Contact Us | Prowler Online Homepage

All material contained herein, Copyright 2000 - 2020

POA Terms of Service