Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
| |||||
Want to register? |
If you have previously registered, but forgotten your password, click here.
This message has been edited by moparmania on 02-09-2003 at 05:33 PM This message has been edited by moparmania on 02-07-2003 at 03:06 PM MAKE BLUEPRINTS TO REPRODUCE PLEASE WOW! ------------------ ------------------ ------------------ Marty moparmania Does anyone have a spare hood for sale . I have too cut a hole in mine for a shaker like on the old Cudas . The HEMI is going to poke through the hood 3-4 inches ? butchcee It will be nice if you ever get it done. The giveaway is the oil fill on the passenger side from the V6. I do have a spare gold hood....needs a little repair. moparmania Butchcee thats just the airbox sitting on the engine .pic is a couple weeks old . V6 is out now . Im just modifiying a 03 truck standard bellhousing to accept a new adaptor for the prowler driveline . This seems to be the hardest part of the conversion. Ive cut the housing 2inches deep just enough to house the flex plate & hold the starter.Im welding a 1/4 inch alum plate with a hole in it to alow the drivshaft adaptor to pass through .Dont laugh at my drawing . Ill post some good pics a little later . Maybe someone has some suggestions for this hook up. WildCat
[/B][/QUOTE]dpena Is that thing for real ....??
That is a very clean image overlay. Can not tell where it was edited.
Watch Me Burn Some Rubber
Official POA banner Designer .. Need A Banner? Get The Details
Check out Prowlerexcitement.com
Wayne Finch Wow, just checked your website. Awesome. If this works out, put me in line.
99 Black Stock Plate PROWLERR
00 Woodward (#98 of 151 - Custom Interior, Plate PPROWLER,
Matching Trailer (numbered & pinstriped)
2002 CANDY RED: Extensive modifications Plate PROWLLER
99 Supercharged Shelby Durango
02 Blue/Silver Viper GTS ACR #1 of 1
***See Scrapbook for PicturesBeWare I am curious what is the comparison of weight between the Hemi and the V6 moparmania Ill try to document everything & blueprint the machined parts . The new hemi weighs 590 lbs . I'm not sure what the 3.5 weighs . The HEMI engine is 27 inches wide outer tip of manifolds . 28 inches long back of flexplate to tip of water pump pulley . The prowler 3.5 is 30 inches x30 inches . Dale Beaman moparmania,
I hope it all works out. Maybe you will be able to produce a kit for the transplant. Someday, if not already, new Hemi's will be more plentiful that Prowler 3.5's and this may be the best way to go.heynow14 MoparMania, Sarabi_extreme has a hood check it out in the classifieds page 2. $300 slight damage. Also I think Bob Goetz may have one also.~Robert moparmania Thanks Heynow Id rather cut up a damaged one than a perfect one . Marty Usher Wow - a HEMI Prowler. Keep us posted, please!! I can't wait to read your future posts.
All material contained herein, Copyright 2000 - 2020