If you have previously registered, but forgotten your password, click here.

T O P I C     R E V I E W
Scott Carmichael	I just purchased a Paxton Supercharger and I was told by Kelly that he has sold just about one hundred of them. I just wanted to know how many of you have one installed on your kat? I got the high out put boost with headers all polished. Can you offer any advice or suggestions or input?
Gary C	I got one, DO NOT run the car with the knob, if you have one all the way to the left, back it off 4 or 5 clicks or more,,,You can run it all the way to the left if you run unleaded race gas, also you can get more boost if you take off the cylinder around the filter but you will blow it up, I am on my second motor, guess what I did....... ------------------ GaryC@ProwlerOnline.com Prowler Products by GaryE, formally Carlini
Scott Carmichael	Thanks for the advice, I get my Kat back on 1/24/03.
Gary C	So you will have the new style, there will be no knob so leave the car in the form you get it and will enjoy many many many miles of smiles........ Congrats
dpena	I do!! ------------------ Watch Me Burn Some Rubber Official POA banner Designer .. Need A Banner? Get The Details Check out Prowlerexcitement.com
dpena	I'm still on my first motor and loving it!!
Scott Carmichael	I got the polished kit with the highoutput boost and headers. It looks great out of the box. I can hardly wait to take it to the track next Friday night.
Steve T	Scott, Who is doing the install for you? Steve ------------------ Steve and Debbie Thomas 2002 Candy Red Prowler 2001 Orange Prowler 2001 Silver Prowler 2002 Yellow ZO6 Vette 2002 35th Anniversary Camaro SS Convertible 2002 Graphite Viper GTS 2003 Chrome Silver 350Z 1969 Garnet Red Camaro SS 350 1967 Hugger Orange Camaro 400 1955 Yellow Chevrolet Truck
JoeD	Scott, Had the same kit installed ~6 weeks ago. After the short test runs, First long drive - got on it hard. These guys are right, "made me smile." A very short Hi though, threw th A/C belt....serpentine. WHY, alignement was ok, that belt needs to be tensioned VERY tight, less than 1/4" deflection (that is not in the manual, but Kelly and others told me that afterwards). I was in shop Bugg'n Mabrey(Mechanic)18 of the ~28 install hrs( did a mopar catback also). It's certainly not a job for a novice, far from a bolt-on. Mabreys good, real good, amd he had his frustrations. Car has more over 4krpm, no rocketship, but certainly more. Glad I did it. Research previous posts on this site. These guys have documented pictorials and a wealth of info. Enjoy! My last 1600 miles are the HARDEST miles I've ever put on my Kat (need to stop wanting mo smiles).
dpena	You can check out my Tech page on my site for alot of mod info expecially the supercharged topic... Check it Out I detailed everything!! Later... ------------------ Watch Me Burn Some Rubber Official POA banner Designer .. Need A Banner? Get The Details Check out Prowlerexcitement.com
Laddie Roussel	I have the original paxton low boost ( 6 to 7 lbs). ------------------
Scott Carmichael	JoeD , Thanks for the infromation on the belt I will pass it on to my mechanic. His name is Brian and he is a Paxton distributor out of Oklahoma City. He has a speciality shop that only installs horsepower products like superchargers.
Scott Carmichael	Steve and Debbie, What a list of cars to drive and enjoy. I also have the 2002 Yellow 35th Anniversary Firebird Trans AM as my daily driver. My Prowler is a 2000 Yellow. Brian at Powerhouse in OKC, OK is doing the install.
Steve T	Scott, Make sure to keep us updated on the install of your supercharger. I am thinking about adding one to the Silver Prowler but no one in the DFW area seems to have any experience installing them. Are you having any other mods done to the Prowler? Steve ------------------ Steve and Debbie Thomas 2002 Candy Red Prowler 2001 Orange Prowler 2001 Silver Prowler 2002 Graphite Viper GTS 2002 Yellow ZO6 Vette 2002 35th Anniversary Camaro SS Convertible 2003 Silver Cobra Coupe 1969 Garnet Red Camaro SS 350 1967 Hugger Orange Camaro 400 1955 Yellow Chevrolet Truck This message has been edited by Steve T on 01-14-2003 at 01:23 PM
Scott Carmichael	Brian at Powerhouse races for Paxton and it is his shop doing the install. He was doing everything from a Corvett to a Ford F100 pickup the day I left my car. I should have it by this Friday if weather permits. I will not drive it in bad weather. I have done other mods to the interior and exterior, but nothing to the engine until now. I put a new chip into my Trans AM and that is all it needed to be bad. I will keep you informed on how it goes. He is only charging $1200.00 for the install. I paid $6300.00 for the deluxe kit.
OnDProw	I have one and love it. ------------------
sam771	I love to have one, but have to wait until my 7 years 100,000 mile expired.
jd2ksilver	I have one, and Im for it. Im keeping quiet on the rest, Dan is too, right Dan? ------------------
monteg	ITS THE ONLY WAY TO FLY!
JUST JP	Scott, I JUST saw where you were from and where you are having it installed. A coworker of mine has had some problems with Powerhouse. He is taking it back in and hopefully they will be resolved. If you would like more info or to speak to him, feel free to contact me. 405-733-2345. Worst case scenario, I would LOVE to take a ride with you once it's done. ------------------ 2000 Black Kat "self-proclaimed" poorest Prowler owner mods: 1) ceramic pads 2) Bill's 2.1 intake with EGR bypass 3) "cracked ice" shimmers 4)49,500+ (s)miles