If you have previously registered, but forgotten your password, click here.

T O P I C     R E V I E W
ZPROWLER2000	I HAVE A 2012 GRAND CHEROKEE 3.6L IT HAD A RECALL MY LOCAL DEALER SAID PARTS ARE DISCONTINUED PART NUMBER CBWPR091AA THANK YOU FOR YOUR HELP
jacktripper	Hi, Hard to believe they have can't do this on a Recall http://www.verticalvisions.com/documents/CCI10262015_00000.pdf was thinking about getting Jeep Cherokee, Guess Not now try here https://www.moparpartshq.com/oem-parts/mopar-wiring-fuel-pump-relay-cbwpr091aa
ZPROWLER2000	quote: Originally posted by jacktripper: Hi, Hard to believe they have can't do this on a Recall http://www.verticalvisions.com/documents/CCI10262015_00000.pdf was thinking about getting Jeep Cherokee, Guess Not now try here https://www.moparpartshq.com/oem-parts/mopar-wiring-fuel-pump-relay-cbwpr091aa THANK YOU FOR YOUR HELP,THEY SAID I HAVE TO GET FROM MY LOCAL DEALER,I JUST DON'T UNDERSTAND
ALLEY CAT	. Z,,, Everywhere I checked said 'not available',,,but http://www.moparpartshq.com/cart might? Check with them.. May need to find at a junk yard..
robin	Read this Jeep thread may be helpful. http://jeepgarage.org/f107/for-anyone-experiencing-the-tipm-fuel-pump- relay-issue-recall-r09-180898.html http://www.amazon.com/gp/product/B01BTUJRSU/ref=oh_aui_search_detailpage?ie=UTF8&psc=1&tag=jeepgarageconvert-20 This message has been edited by robin on 01-05-2019 at 10:14 AM
u00tjs2	if this is a reoccurring failure, owners need to file complaint with Jeep. In reading the link that Robin posted it indicates that this is not only a starting issue, but also vehicle can stop without warning. This sounds like a Safety issue and as such OEM should have made this a Safety Recall, not just a typical recall. reports should be made to NHTSA as well as OEM in US. ------------------ [img]http://www.prowleronline.com/ubb/smilies/blueprowl.gif[/img]
Dfsc1	http://www.verticalvisions.com/omron-g8jn-external-relay.html http://www.ebay.com/p/MAGNAFUEL-MP-1025-Relay-Fuel-Pump-30-Amp-Single-Pole-Each/655670865?iid=401663928466&chn=ps http://www.usaspareparts.com/parts/309-mopar/2432114/cbwpr091aa-external-fuel-pump-relay-pkgrecall.html This message has been edited by Dfsc1 on 01-06-2019 at 02:01 PM
Tomcal	If you don't have luck finding the recall kit, consider building your own. This link on eBay is for relays and relay sockets that look almost identical to Jeep kit and are 30/40 amps. http://www.ebay.com/sch/i.html?_from=R40&_nkw=automotive+relay+socket&_sacat=0&_sop=15&rt=nc&LH_PrefLoc=1 You will also need and in-line fuse holder that's available at any auto parts store. For crimp connectors, use waterproof connectors or conventional ones and strip off insulation, then use shrink tubing, liquid electrical tape or good old plain electrical tape. Brass tubing from a hobby store also works. Then, follow directions in recall instructions. Hope that helps.
ZPROWLER2000	quote: Originally posted by Tomcal: If you don't have luck finding the recall kit, consider building your own. This link on eBay is for relays and relay sockets that look almost identical to Jeep kit and are 30/40 amps. http://www.ebay.com/sch/i.html?_from=R40&_nkw=automotive+relay+socket &_sacat=0&_sop=15&rt=nc&LH_PrefLoc=1 You will also need and in-line fuse holder that's available at any auto parts store. For crimp connectors, use waterproof connectors or conventional ones and strip off insulation, then use shrink tubing, liquid electrical tape or good old plain electrical tape. Brass tubing from a hobby store also works. Then, follow directions in recall instructions. Hope that helps. THANK YOU,LOOKS LIKE THIS IS THE WAY TO GO,THANK YOU AGAIN
Tomcal	Jeff, Also found this with built in fuse, although fuse is exposed to the weather. http://www.ebay.com/itm/5Pcs-DC-12V-Car-SPDT-Automotive-Relay-4-Pin-4-Wires-w-Harness-Socket-30-40-Amp-E/273640383048?hash=item3fb63ce248:g:r30AAOSwF7lcLXdw:rk:3:pf:0 Can't validate quality of any of these made in China relays. But Chrysler/FCA doesn't seem to have any better quality according to Jeep Garage forum. You could just use socket part and buy a higher quality relay, or purchase more than one of the cheap relays and keep spares in glove box. Tom
ZPROWLER2000	quote: Originally posted by Tomcal: Jeff, Also found this with built in fuse, although fuse is exposed to the weather. http://w ww.ebay.com/itm/5Pcs-DC-12V-Car-SPDT-Automotive-Relay-4-Pin-4-Wires-w-Harness-Socket-30-40-Amp-E/273640383048?hash=item3fb63ce248:g:r30AAOSwF7lcLXdw:rk:3:pf:0 Can't validate quality of any of these made in China relays. But Chrysler/FCA doesn't seem to have any better quality according to Jeep Garage forum. You could just use socket part and buy a higher quality relay, or purchase more than one of the cheap relays and keep spares in glove box. Tom THANK YOU AGAIN