| T O P I C R E V I E W |
| WILD THING | does anyone know where you can get another softop for the prowler to fit a 2000 with frame, or is it easier to just replace the canvas top? how much for complete setup and or just the top |
| ALLEY CAT | W/T - I think you can buy the soft top for around $750 and the entire top w/frame runs over $2000. Add the labor, there you have it. Check with your Mopar dealer parts department or email Jeff, the parts guy, listed in CLASSIFIED forum. |
| WILD THING | thanks man,
anyone know how easy is it too replace just the top, or is it possible too replace just the window?
please let me know if anyone knows
thanks |
| ALLEY CAT | I've heard that replacing the entire top with frame, isn't too hard. Replacing the soft top and window only,,,,leave to the experts.
JMO |
| WildCat | if you have a problem with your top take it to a trim shop. They can order a top for the Prowler and with all other tops with glass windows they should be able to get that too. I checked when I had the top put on the Dart about the Prowler and it is listed in the replacement books. This car is 7 years old, WE DO NOT HAVE TO GO TO THE DEALER FOR ALL THE PARTS, unless you want only Mopar parts. Many of the parts will be available thru regular auto parts/shops.
------------------
Larry & Sue Mayes 
|
| WILD THING | is it possible too just replace the window! |
| 01Prowler | Not sure on the window, I don't think so because it's all one piece. You might have a problem with making a seal. I had the top replaced twice on my silver, and it took a week each time. They just replaced the fabric, and not the frame. If you can find a whole assembly frame and all ready to go it can be switched very quickly. I've seen them go on ebay for less than the fabric costs. |
| whealy | I had my top customized as I had its height changed to accommodate my rollbar. The top was $400 and removal and installation was also $400. Had this done at a trim shop as Wildcat suggested. My guess would be that they could replace the window. But I would assume they would have to remove the top to do it. My guess would be that the cost would be near just getting a new top. Hope that helps.
|
| Orange | quote:
Originally posted by whealy:
I had my top customized as I had its height changed to accommodate my rollbar.
Show pics of your customized top and rollbar.
|
| Marty Usher | quote:
Originally posted by Orange:
Show pics of your customized top and rollbar.
Orange - here is pic of Bill's car with top up:
 Go here to see pics of car with top down - about half way down page 2:
http://www.prowleronline.com/ubb/Forum1/HTML/011645-2.html |
| whealy | Thanks Marty Additionally, you can find my scrapbook here. You can also find more info on my way too many posts on the roll bar and top by searching my user name with the search text of "roll bar". This message has been edited by whealy on 09-20-2004 at 09:23 AM |
| catfish | you cannot replace just the window,new mopar top list 1324.00-plus labor.around 400.00 max.there is one a/m top manuf.about 900.00 w/o labor. ------------------
 |
| WAYNEW | quote:
Originally posted by Marty Usher:
Orange - here is pic of Bill's car with top up:
Go here to see pics of car with top down - about half way down page 2:
http://www.prowleronline.com/ubb/Forum1/HTML/011645-2.html
WHAT ABOUT WITH THE TOP DOWN, WOULD LIKE TO SEE THE ROLLBAR IN MORE DETAIL.
------------------
 This message has been edited by WAYNEW on 09-20-2004 at 08:13 PM |
| whealy | quote:
Originally posted by WAYNEW:
WHAT ABOUT WITH THE TOP DOWN, WOULD LIKE TO SEE THE ROLLBAR IN MORE DETAIL.
Waynew, Lots of pics already posted. http://www.prowleronline.com/ubb/Forum9/HTML/000769.html
http://www.prowleronline.com/ubb/Forum9/HTML/000966.html#0
Some of the original question threads with the advise provided.
http://www.prowleronline.com/ubb/Forum1/HTML/007759.html http://www.prowleronline.com/ubb/Forum1/HTML/007819.html http://www.prowleronline.com/ubb/Forum1/HTML/008133.html |
| WAYNEW | This is WAYCOOL. 
------------------
|
