Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
| |||||
Want to register? |
If you have previously registered, but forgotten your password, click here.
can you guys show some pictures of your A-arms section ------------------ This message has been edited by GaryE on 01-11-2015 at 10:28 AM can you guys show some pictures of your A-arms section I polished for many hours. The copper base is really hard to remove. It turned out pretty good but very time consuming. It never suited me. I sold them and the new owner had them powder coated and it turned out nice. I would like to did something like that, with a different design over them. Or is that design painted over the caps? This message has been edited by DrillinU on 01-12-2015 at 04:20 PM This message has been edited by xtreme prowler on 01-13-2015 at 08:45 PM This message has been edited by DrillinU on 01-13-2015 at 09:32 PM Need4Speed trying to see what would be better polishing or chroming the arms or even painting xtreme prowler This is what I have currently but what I had before... There are powdercoated not painted... GaryE Go to my web site and double click on the chrome suspension small picture and several pictures will come up. If you want more let me know. www.prowlerproducts.com Gort quote:
Originally posted by Need4Speed:
trying to see what would be better polishing or chroming the arms or even paintingNeed4Speed So this is powder coated?
quote:
Originally posted by xtreme prowler:
This is what I have currently but what I had before... There are powdercoated not painted...xtreme prowler yes, both the black and the copper JUSTAKID mine was chromed by gary , worth every penny to me DrillinU Jim, how did you get those caps over the bolts? quote:
Originally posted by xtreme prowler:
This is what I have currently but what I had before... There are powdercoated not painted...xtreme prowler These are plastic caps I got on ebay... they were chrome but I painted them black then just wiped off the paint on the iron cross while it was still wet.... used silicone to stick them on and never lost one... DrillinU Would you know the correct sizes for them? quote:
Originally posted by xtreme prowler:
These are plastic caps I got on ebay... they were chrome but I painted them black then just wiped off the paint on the iron cross while it was still wet.... used silicone to stick them on and never lost one...xtreme prowler here you go....
http://chromedhog.com/Bolt-Nut-Caps_c204.htm DrillinU Jim, thank you
they have exactly what I was looking for
quote:
Originally posted by xtreme prowler:
here you go....
http://chromedhog.com/Bolt-Nut-Caps_c204.htm
All material contained herein, Copyright 2000 - 2020