Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
| |||||
Want to register? |
If you have previously registered, but forgotten your password, click here.
------------------ ------------------ I have had a wheel stuck before and what I did was remove the lugs, spray the hub with a penetrating oil and then carefully and slowly lower the vehicle down, putting pressue onto the wheel, "breaking" it loose from the hub. ------------------ • MTD Prowler Intake System 2.2 This message has been edited by William Gallagher on 12-21-2002 at 09:54 PM johnny Question to anyone that can help me. I want to remove my front tires. I took off the five lug nuts and pulled towards me but the tire does not move. Do I need a pulley are do I need to use a rubber mallet to knock it loose? I need an answer now, because I'm working on it now. Thank You, Johnny jd2ksilver They should come off without a mallet. keep wiggling
Wayne Finch Should come right off easy. Try the mallet
99 Black Stock Plate PROWLERR
00 Woodward (#98 of 151 - Custom Interior, Plate PPROWLER,
Matching Trailer (numbered & pinstriped)
2002 CANDY RED: Extensive modifications Plate PROWLLER
99 Supercharged Shelby Durango
02 Blue/Silver Viper GTS ACR #1 of 1
***See Scrapbook for PicturesWPG check this thread for the same problem: http://www.prowleronline.com/ubb/Forum2/HTML/000768.html
Bill Gallagher
1999 Red
www.MagicTouchDesigns.com
• MTD Bypass Kit
• MTD Suspension Frame Braces
• Other Modifications johnny Thanks to everyone who helped me. It took a lot of pushing and pulling but I finally accomplished my mission. Thanks again and Merry Christmas or Happy Holidays. Johnny davidn
All material contained herein, Copyright 2000 - 2020