T O P I C R E V I E W |
davedem | Hi, I have a possible solution to the Rear Lateral Link replacments. These parts are available on-line for about 100$ per link. They use 3/4" rh and lh Heim joints with a ss adjuster. A bushing will be pressed into the Heim so you can utilize the same mounting hardware. If anyone is interested I'll publish the part numbers and suppliers. I just need to add the bushings and jam nuts.Dave |
padroo | Looks good and not a bad price considring the price for Prowler parts. |
catfish | what yr prowler will it fit. ------------------
|
davedem | All of them... |
phil2237 | Without some sort of rubber cushion to absorb the vibration on the backing plate, you will snap the two ears on the backing plate off in no time. |
Larry Lord | Looks great davedem. I see no problems with the strength of the links or the tabs. There may however be a problem with them transmitting road vibrations since they are not rubber mounted bushings. They look like they will work very well and the cost is very low. Please keep us posted.This message has been edited by Larry Lord on 09-07-2013 at 12:54 PM |
BradleyG | Did anybody use these? Look great!! I am installing Control Freaks this week. |