Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
| |||||
Want to register? |
If you have previously registered, but forgotten your password, click here.
04416513 QTY 2 BUMPER, Liftgate When the deck is closed I have some play in the deck lid on the side with only the bumper. Any thots/advice would be appreciated. http://www.prowleronline.com/ubb/Forum2/HTML/000182.html This message has been edited by robin on 02-12-2019 at 10:23 AM Or has anyone found a bumper from another manufacturer that would work? This message has been edited by robin on 02-12-2019 at 12:04 PM OkieHokie I just noticed that on my rear deck lid where the pin that goes into the lower there is one pin on one side and one bumper on the other side. When I look at the parts drawing is shows quantity of 2 of each.
05253384 QTY 2 PIN, Folding Top Headerrobin If you only have the pins on one side and one bumper you are missing some parts. OkieHokie Thats what I figured. I did find some pins although looks like both parts are discontinued. Anybody have a spare bumper they would part with? robin opps Tom Mills You should be able to find bumpers that will work at the parts stores. GM uses a "screw in" type bumper very similar to the Prowler as well as other cars also. OkieHokie Thanks Tom.
Found pins. 1984-1995 Chrysler LeBaron has same pins
All material contained herein, Copyright 2000 - 2020