Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
| |||||
Want to register? |
If you have previously registered, but forgotten your password, click here.
I offer a Fully Polished Aluminum hitch to match the Aluminum Frame for the Prowler that installs just like the original MOPAR, so regardless of which one you install, I will be glad to help. As for the wiring harness... save yourself a lots of time and trouble and order one from the Dealer. My usual disclaimer regarding my ALL Aluminum Hitch... it recommended that it NOT be used to pull up stumps and other similar tasks... this will void the warranty. Best wishes, Jay ------------------ This message has been edited by marks2000woodward on 08-03-2004 at 09:22 AM Also, even though the trailer and its contents may weigh more than 600 lbs. the wheels offer a mechanical advantage to significantly reduce the actual pulling weight and a pivot point reducing the tongue weight, so it would be doubtful if either specification would be a concern. I have been producing these hitches for 3 years and never a failure when properly used... NO stump pulling! Additionally regarding the installation... if you are going to use the Real Rod "Weekender" there is no need to drill any holes in the frame, however if you are planning to pull a Prowler Tag Along Trailer, it is recommended that 2 supplemental mounting holes be drilled in the bottom of the frame. Of course printed instructions are included and we offer a toll free support line (800 669 3540) if you need assistance during the installation. Would you like a copy of the instructions FAXed to you? Best wishes, Jay PS... This fully polished hitch is show quality and enhances the installation. I HAVE A HITCH FOR SALE, JUST TOOK MY OFF!! ANY OFFERS. I WILL POST YOU SOME PHOTO'S TODAY. ------------------marks2000woodward HI,
I AM THINKING OF INSTALLING A TRAILER HITCH ON MY KAT AND WIRING HARNESS. HAVE ANY OF YOU INSTALLED ONE YOURSELF ON YOUR CAR. IF SO COULD YOU "PLEASE" HELP ME OUT WITH STEP BY STEP INSTRUCTIONS AND ANY PICTURES THAT YOU MAY HAVE WILL BE GREATLY APPRECIATED. PLEASE EMAIL ANY INFO. YOU CAN GIVE ME TO: MARKSFELDMAN@JUNO.COM
THANKSYELLER CAT Feel free to give me a call @ 800 669 3540 for any questions regarding this installation. idive The hitch comes with instruction and pictures (cause they knew Ed would be installing one himself too). Let us know if you find any signatures when apart. sam771 After install your hitch, go to U-Hail deler in your area, they have all the wiring harness you need or let the install it for you cost about $35.00 included parts. ed monahan I installed one myself. It is not that big of a deal other than the fact that you have to drill a 1 1/2" hold in both sides of the rear frame. It hurts to drill into your car. I think there is some photos on the site already. It is not technically hard to do the job. The instructions are pretty good that come with the hitch. meancat I only have 1HOTCAT install all my mods and it only takes about 1.5 case of beer.(cheep at twice the price) CJ We installed hitches on both my cats ourselves...not difficult. Good luck! marks2000woodward Thanks for all the help I REALLY APPRECIATE IT!!!!!!!
I have to tell you that this is the best site around with members that are truly GREAT!!!!!!
THANKS AGAIN!!!!!!!!!!!!!CJ Good luck and let us know how it comes out! YELLER CAT Specifications for the Aluminum Hitch... 65 lbs. tongue weight MAX and 600 lbs. pulling capacity MAX. Remember that this is designed for the Prowler (similar) Tag Along Trailer and nothing more. WAYNEW quote:
Originally posted by marks2000woodward:
HI,
I AM THINKING OF INSTALLING A TRAILER HITCH ON MY KAT AND WIRING HARNESS. HAVE ANY OF YOU INSTALLED ONE YOURSELF ON YOUR CAR. IF SO COULD YOU "PLEASE" HELP ME OUT WITH STEP BY STEP INSTRUCTIONS AND ANY PICTURES THAT YOU MAY HAVE WILL BE GREATLY APPRECIATED. PLEASE EMAIL ANY INFO. YOU CAN GIVE ME TO: MARKSFELDMAN@JUNO.COM
THANKS
All material contained herein, Copyright 2000 - 2020