T O P I C R E V I E W |
guido | Need some input on exhaust systems. I am installing a Paxton supercharger and want to change the exhaust system at the same time. Any suggestions?? |
Prowler | Real Rod has a couple of nice systems. His web page is listed in the vendors section. |
Gary C | There is Borla, SS (shimmers system), Paxton has a X -pipe add on which I recommend,,,,,,,,Borla Chrysler system also,,, there are a lot of owners that went to muffler shops for a custom exhaust, Personally I like the Boarla with an x-pipe |
ed monahan | I have had straight pipes for 3 years and I am happy with the sound. |
Gary C | Click here and do a search Search Words: EXHAUST Match all search terms above. Search Forum/Archive: Performance/Appearance Search In: Subject Only Search By Date: Any |
Supervette | Gary is that a direct bolt on replacement or do you have to do some welding? ( I am speaking of the exhaust, but you could also comment on the X pipe ) |
Gary C | I am not sure, there is some pictures on this iste and I am trying to find them |
BeWare | I can't find the X Pipe on the Paxton site. |
Gary C |
|
Gary C | About 10 hp Sounds like a V12 I think it will work on any system welding- yes
|
dpena | Hey Gary, You took this image from my site!! This image is nowhere on the web but in prowlerexcitement.com. You should have just linked it back to my site versus uploading it to prowleronline image uploads directory. Later... |
CJ | I have the Borla Prowler exhaust system on both of my cats and am very happy with them. Much throatier sound than the stock system but not so loud they become obnoxious!! |
Randy Cobb | Guido: I, like CJ, have the Mopar/Borla and I really like it.Gary - As I stated above, I have the Borla. What would adding the x-pipe do in regards to the sound. In an earlier reply I saw you said it made it sound like a V-12. Is it louder, deeper or what? Cost? Thanks, Randy ------------------
|
Gary C | Don't remember the cost, sorry, cheap HP for sure,,, sounds smooooooooother just more refined, I have the Carlini Borla system so your results could be different but I would think you might be happier with the new tone and a little more HP,,,,, an H-pipe does the same and a muffler could do it for you a lot cheaper, I think |
Gary C |
|
WPG | The image of the h-pipe directly above is one I created for my custom exhaust. The h-pipe helps to regain some torque lost when going with a freer flowing exhaust system. It also helps to smooth out the exhaust note, especially at higher rpms. I have 5 or 6 of these h-pipes that I will be selling after the first of the year or whenever I get around to it. ------------------ Bill Gallagher 1999 Red www.MagicTouchDesigns.com • MTD Prowler Intake System 2.2 • MTD Bypass Kit • MTD Suspension Frame Braces • Other Modifications |
YellowFever | quote: Originally posted by William Gallagher: The image of the h-pipe directly above is one I created for my custom exhaust. The h-pipe helps to regain some torque lost when going with a freer flowing exhaust system. It also helps to smooth out the exhaust note, especially at higher rpms. I have 5 or 6 of these h-pipes that I will be selling after the first of the year or whenever I get around to it.
Bill, I have the mopar/borla exhaust system. Would these bolt up somethere or do I have to cut and/or weld something to get them to fit? Thanks Also to all, does the x-pipe have to be welded or pipes cut to get it to fit? I looked under my car and can't see where it would fit without cutting/welding. Thanks
This message has been edited by YellowFever on 12-16-2002 at 11:25 AM |
dpena | I ended up hacking up my latest X-pipe with my glass packs. Later... ------------------ Watch Me Burn Some Rubber Official POA banner Designer .. Need A Banner? Get The Details Check out Prowlerexcitement.com
|