Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
| |||||
Want to register? |
If you have previously registered, but forgotten your password, click here.
Do you have a pic of the placement for the logo on your bra?Phat Kat I just got my front end cover back from having it embroidered. Check it out. Looks GREAT on the KAT! Only cost $35.00 plus the cost of the cover $199 at http://www.americanstitchco.com/ GPS John PhatKat - be sure you have a soft barrier between the back
of the stitching and the paint. I had a situation where the
Mopar car cover for my Viper was on the car and the car was
outside for about a week. When I took the cover off, I had
a fogging effect on the clear coat from the cover shifting
around on the car. The fogged/"scratched" area was directly
under the stitched Viper logo on the cover. It did buff
out, but it was also an unexpected surprise! The rest of
the car looked fine - except the area under the logo's
stitching. Just a heads-up, so the same thing doesn't
happen to you and you find this out when you take the
bra off...Phat Kat John, Thanks for the info. I did think of that and I put a piece of a very soft fluffy terry cloth towel under the embroidery. This is a pic of the cover on the KAT.
All material contained herein, Copyright 2000 - 2020