posted 06-10-2006 02:20 PM                  

Okay...im wondering if anybody has suffered another ball joint failiure within 1 year? am i the only one.

when it first happened to me i was totally suprised as i had no idea about it...however it has happened again about last month and i was only doing 30mph

Now i now seriously thinking about my safety because i dont wanna go down the motorway and end my life, so im seriously thinking about selling it at the end of this year.

posted 06-10-2006 06:17 PM                  

Go to the Chrysler website through the following link : http://www.chrysler.com/webselfservice/chrysler/inde x.jsp?screenName=recall&country=us&emailUrl=goToEmailForm%28%27R%27%29

Fill in your VIN and you can see if there are any
recalls outstanding yourself.
If a recall has not been performed or has not been
acknowledge by the dealer it will give the recall with
an INCOMPLETE message, meaning you still have to do it.

posted 06-10-2006 08:18 PM                  

I do it all of the time.

posted 12-11-2009 11:26 PM                  

quote:

---

Originally posted by BeWare:
This was taken by a post from Kees 07/25/2004. I hope it helps

Go to the Chrysler website through the following link : http://www.chrysler.com/webselfservice/chrysler/inde x.jsp?screenName=recall&country=us&emailUrl=goToEmailForm%28%27R%27%29

Fill in your VIN and you can see if there are any
recalls outstanding yourself.
If a recall has not been performed or has not been
acknowledge by the dealer it will give the recall with
an INCOMPLETE message, meaning you still have to do it.

---

posted 12-11-2009 11:28 PM                  

quote:

---

Originally posted by BeWare:
Also this link to Dan's website might be a big help determining if you have the old or new ball joints installed.
http://www.prowlerexcitement.com/CurtisProwlerTech/BallJointModification/index.htm

---

posted 12-12-2009 03:12 AM                  

When I tried to get the recall done, here in Sweden, the answer was that they can not help me anywhere in Europe!
This due to that Prowler was never sold outside of USA and Canada, and therefor they have no obligation to help! Only way was to take the whole cost myself! Still thinking about what to do.

posted 12-12-2009 12:54 PM                  

Luck, I had no problem with the ball joints of bouth of my Prowlers. The balls were replaced in the USA before.

--I drove the Kat´very sporty around the corners in the mountains (alps), drove often 120mp/h along the autobahn. I hope, that I run not in trouble in the future .......

-

posted 12-14-2009 03:02 AM                  

That's strange. Chrysler has a worldwide servicing arrangement though the dealerships.
My local dealer performed a couple of recalls, including the valve clatter at no cost to me.

I would suggest yuo make an offcial complaint and ask for assistance from Chrysler to facilitate the discussion with
your dealership.

Best regards,

Kees