Home Page Owners Registry Discussion Forums ProwlerMall Event Scrapbooks About

Click here to return to the Prowler Online Board Main Page 		  ProwlerOnline, Plymouth/Chrysler Prowler Discussion Forum
  General Prowler Discussion
  Front bumper removal. Relocation lamps in.

Post New Topic  Post A Reply
edit profile | register | preferences | faq | search

   Bottom of Page next newest topic | next oldest topic
Author Topic:   Front bumper removal. Relocation lamps in.
thomas leuschner

POA Site Supporter
Prowler Junkie

From:e.islip,ny.,usa
Registered: Dec 2001
Admin Use

posted 01-09-2004 05:30 PM     Click Here to See the Profile for thomas leuschner     send a private message to thomas leuschner   Edit/Delete Message   Reply w/Quote   Search for more posts by thomas leuschner
Some of you people who removed your bumpers may find this hard to believe. After much looking and figuring how I was going to attack this job, I grabbed my Craftsman 1/4" ratchet and 13mm socket and committed myself. Now the unbelievable part. It took me 10 to 12 minutes a side. The nuts being tack welded to the flap of metal made it a piece of cake.
The Tom Mills kit makes the Kat look more aggressive in the front and certainly cleaner.
I am waiting for my front body protector to come from real rod, that will finish phase 1 of my plans Phase 2 will be the gears.
Again thanks to the members of POA who responded to my posts
GRROWL


POA Site Supporter
Prowler Junkie

From:Herndon, VA
Registered: Feb 2002
Admin Use

posted 01-09-2004 05:47 PM     Click Here to See the Profile for GRROWL     send a private message to GRROWL   Edit/Delete Message   Reply w/Quote   Search for more posts by GRROWL
quote:
Originally posted by thomas leuschner:
Some of you people who removed your bumpers may find this hard to believe. After much looking and figuring how I was going to attack this job, I grabbed my Craftsman 1/4" ratchet and 13mm socket and committed myself.

Not hard to believe at all, great minds think alike:

quote:
Originally posted by GRROWL on 1/4/2004:
Also, don't need a lift to remove the bumpers, but a short ratchet is very helpful for that last bolt (I used a Craftsman 1/4" ratchet, which just fit).

All times are CT (US)  Top of Page  Previous Page

 Return to General Prowler Discussion  next newest topic | next oldest topic



Administrative Options: Close Topic |Make Sticky | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | Prowler Online Homepage

All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP

POA Terms of Service