posted 02-28-2002 12:48 PM         

I have a 2000 Dodge Intrepid R/T. There seems to be some similarities between the R/T (and some other LH cars) and the Prowler. For example the same 3.5L HO engine and the same tranny (although the R/T is FWD). It has been debated time and time again over at http://www.dodgeintrepid.net that adding more than just a little horsepower will shred the tranny. Some say it will, others say that the tranny will be fine. Now, since the Prowler uses the same tranny, how you guys (and gals?) add your superchargers and your turbos (not to mention NOS) without messing up your trannies??? What did you have to do (such as ad a tranny cooler, etc) to make this work? Any information would be appreciated and very helpful.

Thanks in advance,
-chase

posted 02-28-2002 01:38 PM         

The Prowler has a tranny cooler standard... It's mounted in the rear of the Prowler under the license. And, on the Prowler they moved the tranny from the engine to the rear axle...

The tranny has held up fine... the only real problem is the little input & output sensors (same problem you have on the other cars with that tranny).

------------------