Posts: 12017
From: San Diego Area
Registered: JUL 2000

posted 02-16-2004 10:36 PM         

---

Although the result of the REM(tm) process is a beautiful finish, it is Important to realize that the system does not polish the part. The process involves two steps. The first, referred to as the refinement process involves a chemical interaction on the surface of the part. A soft, thin (one micron) film is formed on the surface of the part. The part interacts with the ceramic media in a special vibratory tub, this film is physically removed from the "peaks" of the processed part and the "valleys" are unaffected. The chemically induced film re-forms only at the peaks that are interacting with the vibratory media, and the process repeats itself. Over time, the peaks are removed, leaving only the valleys, producing the improved micro finish. The second step is referred to as the burnish process. After the required micro finish is achieved, a mild alkaline mixture is introduced. After a relatively short period a polished, chrome-like finish is produced. In addition to the polishing effects, this step effectively removes all traces of the film formation from the refinement process.

THE BENEFITS ARE:

Reduced Friction, Vibration and Noise
Improved shifting
Longer life
More power to the wheels
Reduction in Lubricant Temperature

I talked to them and they said about 3-5% more power to the wheels, cool another 30-50hp, just what I need.

Posts: 10955
From: Dallas, TX
Registered: NOV 2000

Posts: 12017
From: San Diego Area
Registered: JUL 2000

Posts: 10955
From: Dallas, TX
Registered: NOV 2000

Posts: 12017
From: San Diego Area
Registered: JUL 2000

posted 02-16-2004 11:20 PM         

---

Back to the Rem, just trying to help out the people who will go that extra mile.

One more thing putting a Quaife in the Viper.

Posts: 10955
From: Dallas, TX
Registered: NOV 2000

Posts: 3332
From: Burtonsville,Md Good ole U.S.A
Registered: MAR 2003

Posts: 12017
From: San Diego Area
Registered: JUL 2000

All times are CT (US)