Archive: Hemi Truck owners. - ProwlerOnline, Plymouth/Chrysler Prowler Discussion Forum

Note: This is an archived topic. It is read-only.

ProwlerOnline, Plymouth/Chrysler Prowler Discussion Forum

Off Topic

Hemi Truck owners.

UBBFriend: Email This Page to Someone!

profile | register | preferences | faq | search

This topic was originally posted in this forum: Tires, Rims Discusssion

Author	Topic: Hemi Truck owners.
firegabe Prowler Junkie Posts: 313 From: Ca. Registered: NOV 2003	posted 02-06-2006 01:38 PM I you want fun useable power!!! I have a Rumble Bee with the 5.7 engine. I and MANY, MANY others have installed the factory 6.1 Hemi cam into the 5.7 wow what a difference I also used new Manley springs and Pushrods (the factory ones are junk!!!!) If you wish to spend the Money the 6.1 heads are about 1K. more and flow GREAT!!! but you must use headers or different exhaust manifolds for the 6.1 heads. The best part is these are all factory parts! except the springs that you can't tell the diffirence while installed. There has only been one problem out of all of them that I know of, is 1 Comp Cam spring colapsed, It was actually taken to the dealer and fixed under Warr. hehehe. If you have any questions plaese just Pm. gabe
BeWare Prowler Junkie Posts: 18511 From: Acworth,GA,USA Registered: JUL 2000	posted 02-06-2006 07:06 PM How has affected your MPG?
BeWare Prowler Junkie Posts: 18511 From: Acworth,GA,USA Registered: JUL 2000	posted 02-06-2006 07:06 PM How has it affected your MPG?
firegabe Prowler Junkie Posts: 313 From: Ca. Registered: NOV 2003	posted 02-07-2006 10:34 AM I JUST did mine on sunday Simple one day job in my Garage WITH THE HEADS AND OIL PAN STILL ON THE TRUCK!!!!!! Let me go through a fuel tank first and I'll post millage. This First tank might be quite low because of the fun factor!! My friend came to help me has installed 6.1 everything on his truck Factory 6.1 headers, intake, heads, cam EVERYTHING on a 5.7 block he never took out of the truck. We raced against my Kat stock with prowler pro gears and he kicked my butt BAD!!! Firegabe
MDProwler Prowler Junkie Posts: 5250 From: Fallston,MD USA Registered: JUL 2003	posted 02-07-2006 10:58 AM What was the total cost and do you have part numbers?

All times are CT (US)	This is an ARCHIVED topic. You may not reply to it!

	Hop to:

Contact Us | Prowler Online Homepage

All material contained herein, Copyright 2000 - 2012 ProwlerOnline.com
E-Innovations, LP

POA Terms of Service